Get NSE7_SDW-7.0 Products Practice Material for NSE7_SDW-7.0 Exam Question Preparation
Most Reliable Fortinet NSE7_SDW-7.0 Training Materials
NEW QUESTION # 28
Which two interfaces are considered overlay links? (Choose two.)
- A. Physical
- B. IPsec
- C. GRE
- D. LAG
Answer: B,C
NEW QUESTION # 29
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.
The administrator wants FortiGate to limit the bandwidth used by YouTube. When testing, the administrator determines that FortiGate does not apply traffic shaping on YouTube traffic.
Based on the policies shown in the exhibits, what configuration change must be made so FortiGate performs traffic shaping on YouTube traffic?
- A. Application control must be enabled on the firewall policy.
- B. Destination internet service must be enabled on the traffic shaping policy.
- C. Individual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.
- D. Web filtering must be enabled on the firewall policy.
Answer: A
NEW QUESTION # 30
Refer to the exhibit.
The device exchanges routes using IBGP.
Which two statements are correct about the IBGP configuration and routing information on the device?
(Choose two.)
- A. You can run the get router info routing-table database command to display the additional paths.
- B. Each BGP route is three hops away from the destination.
- C. ibgp-multipath is disabled.
- D. additional-path is enabled.
Answer: A,D
NEW QUESTION # 31
Which two statements are correct when traffic matches the implicit SD-WAN rule? (Choose two.)
- A. All SD-WAN rules have the default setting enabled.
- B. The sdwan_service_id flag in the session information is 0.
- C. Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting.
- D. Traffic does not match any of the entries in the policy route table.
Answer: B,D
NEW QUESTION # 32
Refer to the exhibit.
The exhibit shows the BGP configuration on the hub in a hub-and-spoke topology. The administrator wants BGP to advertise prefixes from spokes to other spokes over the IPsec overlays, including additional paths. However, when looking at the spoke routing table, the administrator does not see the prefixes from other spokes and the additional paths.
Based on the exhibit, which three settings must the administrator configure inside each BGP neighbor group so spokes can learn other spokes prefixes and their additional paths? (Choose three.)
- A. Set additional-path to send
- B. Set adv-additional-path to the number of additional paths to advertise
- C. Set advertisement-interval to the number of additional paths to advertise
- D. Enable soft-reconfiguration
- E. Enable route-reflector-client
Answer: A,B,E
NEW QUESTION # 33
Exhibit.
Which conclusion about the packet debug flow output is correct?
- A. The total number of daily sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- B. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- C. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the firewall policy, and the packet was dropped.
- D. The packet size exceeded the outgoing interface MTU.
Answer: B
NEW QUESTION # 34
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
- A. The zero-touch provisioning process has completed internally, behind FortiGate.
- B. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- C. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
- D. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- E. A factory reset performed on FortiGate.
Answer: A,D
NEW QUESTION # 35
Refer to the exhibit.
Which are two expected behaviors of the traffic that matches the traffic shaper? (Choose two.)
- A. The traffic shaper limits the combined bandwidth of all connections to a maximum of 5 MB/sec.
- B. The number of simultaneous connections among all source IP addresses cannot exceed five connections.
- C. The traffic shaper limits the bandwidth of each source IP address to a maximum of 625 KB/sec.
- D. The number of simultaneous connections allowed for each source IP address cannot exceed five connections.
Answer: C,D
NEW QUESTION # 36
Which two statements about SD-WAN central management are true? (Choose two.)
- A. It does not support meta fields.
- B. It uses templates to configure SD-WAN on managed devices.
- C. The objects are saved in the ADOM common object database.
- D. It supports normalized interfaces for SD-WAN member configuration.
Answer: B,C
Explanation:
Explanation
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-
NEW QUESTION # 37
Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?
- A. get ipsec tunnel list
- B. diagnose debug application ike
- C. diagnose vpn tunnel list
- D. get router info routing-table all
Answer: B
NEW QUESTION # 38
Which components make up the secure SD-WAN solution?
- A. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- B. Application, antivirus, and URL, and SSL inspection
- C. Telephone, ISDN, and telecom network.
- D. Datacenter, branch offices, and public cloud
Answer: A
NEW QUESTION # 39
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?
- A. Enable snat-route-change under config system global.
- B. Disable tcp-session-without-syn under config system settings.
- C. Enable auxiliary-session under config system settings.
- D. Disable allow-subnet-overlap under config system settings.
Answer: C
Explanation:
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-with-auxiliary-session
NEW QUESTION # 40
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. FortiGate has terminated the session after a change on policy ID 1.
- B. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- C. Changes have been made on firewall policy ID 1 on FortiGate.
- D. Firewall policy ID 1 has source NAT disabled.
Answer: C
NEW QUESTION # 41
What are two benefits of using forward error correction (FEC) in IPsec VPNs? (Choose two.)
- A. FEC can leverage multiple IPsec tunnels for parity packets transmission.
- B. FEC improves reliability of noisy links.
- C. FEC supports hardware offloading.
- D. FEC transmits parity packets that can be used to reconstruct packet loss.
Answer: B,D
NEW QUESTION # 42
Refer to the exhibits.
Which two statements about the IPsec VPN configuration and the status of the IPsec VPN tunnel are true? (Choose two.)
- A. Dead peer detection is disabled.
- B. FortiGate facilitated the negotiation of the T_INET_1_0_0 ADVPN shortcut over T_INET_1_0.
- C. The phase 1 configuration supports the network-overlay setting.
- D. FortiGate does not install IPsec static routes for remote protected networks in the routing table.
Answer: C,D
NEW QUESTION # 43
Refer to the exhibit.
Based on the exhibit, which two actions does FortiGate perform on traffic passing through port2? (Choose two.)
- A. FortiGate flushes all routing information from the session table, after a route change.
- B. FortiGate does not change the routing information on existing sessions that use a valid gateway, after a route change.
- C. FortiGate always blocks all traffic, after a route change.
- D. FortiGate performs routing lookups for new sessions only, after a route change.
Answer: B,D
NEW QUESTION # 44
......
LATEST NSE7_SDW-7.0 Exam Practice Material: https://www.actualpdf.com/NSE7_SDW-7.0_exam-dumps.html
The Realest Study Materials NSE7_SDW-7.0 Dumps: https://drive.google.com/open?id=1n1fQ0wHGo9pmDBGjMaBZrshPArkPB5br
