2023 Realistic Verified HPE6-A66 exam dumps Q&As - HPE6-A66 Free Update
Use Real HPE6-A66 Dumps - 100% Free HPE6-A66 Exam Dumps
HP HPE6-A66 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 28
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1
- C. 1,030
- D. 2
Answer: C
NEW QUESTION # 29
A network architect is designing a new wireless solution for a company The company needs seamless roaming and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?
- A. IAP VC
- B. AirMatch
- C. Clustering
- D. Client Match
Answer: C
NEW QUESTION # 30
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?
- A. Micro-B USB
- B. RJ-45
- C. RS-232
- D. USB-A
Answer: A
NEW QUESTION # 31
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 510s
- B. Two outdoor AP 387s
- C. Multi-mode fiber between campus switches
- D. Two outdoor AP 367s
Answer: D
NEW QUESTION # 32
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
- B. LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
- C. LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
- D. LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
Answer: C
NEW QUESTION # 33
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?
- A. Start Page
- B. Site-1
- C. Catalog
- D. Topology
Answer: B
NEW QUESTION # 34
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of a Floorplan and Building View
- B. Define the appropriate dimensions of each object in a Floorplan View
- C. Define the appropriate dimensions of each room in a Floorplan View
- D. Define the appropriate dimensions of a Floorplan View
Answer: B
NEW QUESTION # 35
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?
- A. 1 Gbps
- B. 10 Gbps
- C. 5 Gbps
- D. 2.5 Gbps
Answer: D
NEW QUESTION # 36
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. Two 7205 mobility controller and campus APs in a cluster
- B. Two 7030 mobility controller and campus APs in a cluster
- C. FRAPs in a cluster
- D. lAPs in a cluster
Answer: C
NEW QUESTION # 37
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 0
- B. 1
- C. 7240XM
- D. 2
Answer: A
NEW QUESTION # 38
Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?
- A. New Express Mode
- B. New Project
- C. New Campus
- D. New Site
Answer: C
NEW QUESTION # 39
Which feature does the Aruba AP 387 support?
- A. Indoor usage
- B. included external directional antennas
- C. 802.11 ax
- D. 60GHZRF
Answer: D
NEW QUESTION # 40
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?
- A. 5406R switches
- B. 2930F switches
- C. 2930M switches
- D. 3810M switches
Answer: C
NEW QUESTION # 41
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
- B. Two 7205 mobility controllers in a cluster
- C. Two 7030 mobility controllers in a cluster
- D. A standalone 7008 controller per floor
Answer: A
NEW QUESTION # 42
Which type of Aruba AP uses its radio as its back-haul connection?
- A. Air Monitor (AM)
- B. Remote AP (RAP)
- C. Mesh Point
- D. Mesh Porta
Answer: D
NEW QUESTION # 43
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 44
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
- A. 338,100 feet {31,410 square meters)
- B. 55.750 square feet {5,175 square meters)
- C. 56.350 square feet {5,235 square meters)
- D. 47.000 square feet {4,365 square meters)
Answer: C
NEW QUESTION # 45
A network architect is given the task to design a new network solution for NewStellar Company, Inc. NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1, Floor 2, including the central area, and that half the required APs will connect to each wiring closet, approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+ needs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 46
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 10MHZ
- B. 40 MHZ
- C. 20 MHz
- D. 60 MHZ
Answer: D
NEW QUESTION # 47
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
- A. AirWave server
- B. Aruba APs
- C. Aruba mobility controller
- D. enterpnse authentication server
- E. Active Directory server
Answer: A,C
NEW QUESTION # 48
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?
- A. OfficeConnect 1950
- B. Aruba 2930F
- C. Aruba 2930M
- D. Aruba 2540
Answer: C
NEW QUESTION # 49
A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?
- A. Spit the Building View into two Floorplan Views
- B. Create a Region in the Floorplan View
- C. Define the appropriate properties in the Building View
- D. Define the appropriate properties in the Network View
Answer: C
NEW QUESTION # 50
A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When creating a Campus view, how would the network architect pull in a map that displayed the campus location in a city?
- A. Import the longitude and latitude information from any web-based map site
- B. Create a screen capture from any web-based map site and import the picture file
- C. Import the longitude and latitude information from Google Maps
- D. Use VisualRF's built-in map tool and define the appropriate longitude and latitude information
Answer: A
NEW QUESTION # 51
......
Pass HPE6-A66 exam Updated 60 Questions: https://www.actualpdf.com/HPE6-A66_exam-dumps.html
HPE6-A66 Exam Dumps, Test Engine Practice Test Questions: https://drive.google.com/open?id=1yGMqVNP1ZxqK_45QO5QyDIfMntz50feS
