1Z0-1048-20 Exam Dumps, 1Z0-1048-20 Practice Test Questions
PDF (New 2022) Actual Oracle 1Z0-1048-20 Exam Questions
NEW QUESTION 24
On the Rule Template Outputs page for a time calculation rule formula, can you add additional outputs not defined in the formula?
- A. only for Time Device rules
- B. yes
- C. no
- D. only for Time Entry rules
- E. only for Time Validation rules
Answer: B
Explanation:
Explanation
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAUTL/FAUTL1471285.htm#FAUTL1788594
NEW QUESTION 25
Which three tasks can a Time and Labor Manager perform from the planned schedule?
- A. Monitor absences.
- B. Monitor work coverage.
- C. Schedule shifts.
- D. Enter time for workers.
- E. Balance workloads.
Answer: B,C,E
Explanation:
Explanation
Reference
https://docs.oracle.com/cloud/r13_update17b/globalcs_gs/FAUTL/FAUTL1657098.htm#FAUTL1657098
NEW QUESTION 26
You need to assign a worker as a scheduler and act on a manager's behalf. The worker should have access to scheduling groups X and Y, but not to Z.
How should you set this up?
- A. You only need to give the worker the Time and Labor Manager role
- B. You need to assign this worker as a scheduler to the correct scheduler profiles and give this worker the Time and Labor Manager role
- C. You only need to create a scheduler profile for this worker
- D. Only line managers can be schedulers
Answer: C
NEW QUESTION 27
A worker is supposed to report for a morning shift with a scheduled start time of 08:00 AM. In the related shift limits, the grace period is set to 15 minutes and the Start Early period to 60 minutes. The worker punches in at
07:15 AM.
What exception is generated?
- A. Late in time entry
- B. Invalid in time entry
- C. Early in time entry
- D. No exception is generated.
Answer: C
NEW QUESTION 28
Your customer has asked you to define an overtime period that is different from the time card period and wants to display the overtime bar on the calendar page and in the time card matrix.
Which two solutions meet this requirement?
- A. Enable the overtime option on the time categories to show overtime periods separately.
- B. Enable the highlight overtime periods option in the time entry properties section of time card matrix.
- C. Create a repeating time period by selecting period type as overtime to enable overtime periods separately.
- D. Create a separate repeating time period by selecting overtime checkbox in period usage section.
- E. Create a repeating time period by selecting formula option to enable overtime periods separately.
Answer: B,C
NEW QUESTION 29
Workers can be assigned a night shift allowance when reporting time between 08:00PM and 11:00PM.
Which two options should you perform to configure that?
- A. You define a unit's x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, and manually assign one quantity of the payroll time type related to the night shift allowance on the worker's time card.
- B. You define an hours x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, and define a time calculation rule to automatically generate the night shift allowance based on the night conditions.
- C. You define a unit's x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, define a time entry field dependent on the payroll time type time attribute using the units x rate time attribute, and manually assign one quantity of the dependent time attribute on the worker's time card.
- D. You define a unit's x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, and define a time calculation rule to automatically generate the night shift allowance based on the night conditions.
Answer: A,B
NEW QUESTION 30
How should you disable the Delete button for an employee after their time card has been submitted?
- A. by specifying the Time Entry Actions Allowed on the Security Task Profile
- B. by specifying the Time Entry Actions Allowed on the Time Entry Processing Profile
- C. by specifying the Time Entry Actions Allowed on the Time Card Layout
- D. by specifying the Time Entry Actions Allowed on the Worker Time Entry Setup Profile
Answer: B
NEW QUESTION 31
You have 10 different Legislative Data Groups (LDG) defined. Each LDG has a different set of Payroll Time Types and Absence Types.
How should you configure a Layout Component to display the proper values in one single list on the Time Entry Layout?
- A. Create a Multiple Attribute Time Card Field, filtering the list using Element Eligibility.
- B. Create a Multiple Attribute Time Card Field, filtering the list using Assignment ID.
- C. Cannot be done in one list. This requires two separate selection lists (Time Card fields), placed on the Time Entry Layout.
- D. Create a Multiple Attribute Time Card field, filtering the displayed values based on the LDG Filtering function.
Answer: D
NEW QUESTION 32
How should you remove email notifications from the Time card Workflow if it has been set up for auto approvals?
- A. Go into BPM, remove each individual from the approval email notification list.
- B. This is not possible.
- C. Go into BPM, edit the TimecardApproval task and the TimecardApprovalFYI task, and remove the notification sent to Assignee when task is completed and/or in Error.
- D. Go into BPM, and select the "no email notifications" check box on the TimecardApproval task.
Answer: D
NEW QUESTION 33
A customer needs to evaluate overtime on a weekly basis while using a biweekly time card period.
Which option outlines how this requirement can be supported?
- A. A weekly time period would be attached to the Worker Time Entry Setup Profile in the Overtime Period field
- B. A weekly time period would be attached to the Worker Time Processing Setup Profile in the Overtime Period field
- C. A weekly time period would be attached to the TCR Rule Template, the TCR Rule, the TCR Rule Set
- D. A weekly time period would be attached to the Fast Formula used to create the TCR Rule Template
Answer: C
NEW QUESTION 34
A customer requirement is to use the first part (week) of a biweekly time card period for validation purposes.
Which option outlines how this could be accomplished?
- A. Create a new TER formula and rule template. Define the validation period within the formula. Set the summation period to "Time Card Level" in the rule template and enable the input parameters. Create rules using the new rule template and assign them using a rule set.
- B. Create a new rule template using a delivered TER formula. Enable input parameters in the template to define the validation period and set the summation period to "Day Level." Create rules using the new rule template and assign them using a rule set.
- C. Create a new TER formula and rule templates. Define the validation period within the formula. Enable the summation level selection when defining the rule as an input parameter within the rule templates.
Create rules using the new rule templates and assign them using a rule set. Place the "Day Level" rules on Rows 1-7 for days 1-7 in the time card period, and the "Time Card Level" Rule in the 8th row. Use the Processing Sequence to order the rules. - D. Create a new rule template using a delivered TER formula. Enable input parameters in the template to define the validation period and set summation period to "Time Card Level." Create rules using the new rule template and assign them using a rule set.
Answer: C
NEW QUESTION 35
Your customer requires three people to approve time cards before they are regarded as approved and can be transferred to payroll.
What is the first step to accomplish this?
- A. This can't be done as Time and Labor supports multiple approves for Projects Time Cards only.
- B. Define an HCM group containing the appropriate people and specify this group in the worker's Time processing Profile.
- C. Use the Manage Approval Groups for Human Capital Management task in Setup and Maintenance.
- D. This can't be done as Time and Labor supports one approver only.
- E. Use the Manage Approval Groups for Time and Labor task in Setup and Maintenance.
Answer: E
NEW QUESTION 36
Some users are complaining that the Time and Labor system is allowing them to record time against projects in which they are not team members. Further, the time type column name is project name, whereas the values are project numbers.
What should you do to correct this issue?
- A. The "team member" issue cannot be fixed in Time and Labor; it must be fixed in Cloud Projects. Also, because the time type selected cannot be changed, you change the column name to "Project Number" so that it is consistent with the data selected.
- B. Create a new layout set with the "Enable Project Team membership" option selected. Edit the time card layouts for the new layout set, delete the "Project Number" row, create a new row, select "Project Name", and then assign to the appropriate time entry profile.
- C. Create a new layout set with the "Enable Project Team membership" option selected. Because the time type selected cannot be changed, you change the column name to "Project Number" so that it is consistent with the data selected.
- D. This cannot be done in Time and Labor, but it can be done in Cloud Projects. So you would have to change appropriate options in Cloud Projects to fix both issues.
- E. Edit the existing layout set and select the "Enable Project Team membership" option from the drop-down list. Create a new time card layout from scratch and select the "Project Name" check box.
Answer: B
NEW QUESTION 37
Your customer wants to use badge readers as a time collection device. You have added your device supplier to the lookup as BADGE_READERS_INC.
While adding the supplier device events to the lookup, which two lookup codes should you use for your Badge In and Badge Out events?
- A. BADGE_READERS_INC_IN_OR_OUT
- B. BADGE_READERS_INC_IN
- C. BADGE_READERS_INC_OUT
- D. IN_BADGE_READERS_INC
- E. OUT_BADGE_READERS_INC
Answer: D,E
NEW QUESTION 38
When a worker's rules are not executing as expected, where should you check first to ensure that the rules are properly assigned to the worker?
- A. the Manage Setup Profiles task
- B. the Manage Time Consumer Set task
- C. the Manage Time Layout Sets task
- D. the Manage Time Entry Layout Component task
Answer: D
NEW QUESTION 39
......
Oracle 1Z0-1048-20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 14 |
|
| Topic 15 |
|
| Topic 16 |
|
Updated Jan-2022 Pass 1Z0-1048-20 Exam - Real Practice Test Questions: https://www.actualpdf.com/1Z0-1048-20_exam-dumps.html
