Steps Necessary To Pass The 2V0-41.20 Exam from Training Expert ActualPDF
Valid Way To Pass VCP-NV's 2V0-41.20 Exam
Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam
Installing, configuring, handling, and troubleshooting NSX-T Data Center 3.0 solutions should be 6 months or more of experience for the minimally eligible applicant. Candidates who are well aware of NSX-T characteristics, functions, and architectures should take this exam. People with at least 6 months of Linux and KVM hands-on experience are highly encouraged to apply for this certification as this will give them an edge. In IT and with VMware vSphere and its command line, they should have 1 year of experience operating. Additional industry-recognized IT certifications or accreditation would likely be held by the successful applicant. All the information found in the exam sections mentioned below should be in the MQC.
Introduction to Professional VMware NSX-T Data Center 2V0-41.20 Exam
This is a 70-item test with a passing score of 300 using a scaled system is the Professional VMware NSX-T Data Center 2V0-41.20 Exam that leads to VMware Certified Professional-Network Virtualization 2020 certification. An appointment time of 105 minutes is given to candidates, which includes five-minute seating time and ample time for non-native English speakers to complete the test. The total length of the exam is 100 minutes.
This is a proctored exam distributed worldwide at Pearson VUE testing centres. Visit the Pearson VUE Web site for more information.
Professional VMware NSX-T Data Center 2V0-41.20 Certification Path
Before applying for Professional VMware NSX-T Data Center 2V0-41.20 Certification, applicants are required to have at least 6 months of experience with Linux and KVM. Another 1 year experience with VMware vSphere and its command line is required as an official prerequisite for this exam. However, the recommended knowledge and experience required is discussed in detail in the “Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam” section of this document. Kindly refer to this section for more information.
NEW QUESTION 17
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB VIP Routes
- B. Advertise All NAT Routes
- C. Advertise All LB SNAT IP Routes
- D. All Static Routes
- E. Information
Answer: A,C
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95A7-7645BA562D62.html
NEW QUESTION 18
What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)
- A. policy-based IPSec VPN
- B. route-based IPSec VPN
- C. SSL based IPSec VPN
- D. Layer-7 based IPSec VPN
- E. Open source based IPSec VPN
Answer: A,B
NEW QUESTION 19
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- B. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- C. Automatically created when Tier-1 is created.
- D. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
Answer: A
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html
NEW QUESTION 20
Which three can an administrator define in a transport node profile? (Choose three.)
- A. Uplink Profile
- B. Segment Profile
- C. Logical Router
- D. N-VDS switch configuration
- E. VDS switch configuration
- F. Segment
Answer: A,D,E
NEW QUESTION 21
Which network tool cloud an administrator use on an ESXi 7 host to capture packets when troubleshooting connectivity issues?
- A. tcpdump
- B. Wireshark
- C. net-stats
- D. pktcap-uw
Answer: D
Explanation:
If you do when troubleshooting connectivity issues on your Virtualization environment. This post will help you to capture Network traffic on ESXi host using pktcap-uw tool.
NEW QUESTION 22
A security administrator needs to configure a firewall rule based on the domain name of a specific application.
Which field in a distributed firewall rule does the administrator configure?
- A. Source
- B. Policy
- C. Service
- D. Profile
Answer: D
NEW QUESTION 23
Which two logical router components span across all transport nodes? (Choose two.)
- A. TIER0_DISTRIBUTED_ROUTER
- B. DISTRIBUTED_ROUTER_TIER1
- C. SERVICE_ROUTER_TIER0
- D. DISTRIBUTED_ROUTER_TIER0
- E. SERVICE_ROUTER_TIER1
Answer: B,D
NEW QUESTION 24
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. set support-bundle file vcpnv.tgz
- B. esxcli system syslog config logger set --id=nsxmanager
- C. get support-bundle file vcpnv.tgz
- D. vm-support
Answer: D
NEW QUESTION 25
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
- A. join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>
- B. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>
- C. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint <nsx-manager-thumbprint>
- D. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
<nsx-manager-thumbprint>
Answer: B
NEW QUESTION 26
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Route Distribution
- B. Local AS
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF. - C. Graceful Restart
- D. BGP Neighbors
- E. Route Aggregation
Answer: D,E
NEW QUESTION 27
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service nsx-manager logging-level debug
- B. set service manager logging-level debug
- C. set service nsx-manager log-level debug
- D. set service manager log-level debug
Answer: B
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html
NEW QUESTION 28
Where are Distributed Firewall logs containing access decisions stored?
- A. Hypervisor transport node
- B. NSX API
- C. NSX Manager
- D. NSX Edge
Answer: A
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6F9DC53E-222D-464B-8613-AB2D517CE5E3.html
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A299-0C3C3546ABF3.html
NEW QUESTION 29
What are two supported N-VDS modes? (Choose two.)
- A. DPDK Datapath
- B. Secure Datapath
- C. Overlay Datapath
- D. Enhanced Datapath
- E. Standard Datapath
Answer: D,E
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D-CFBB31908D1C.html
NEW QUESTION 30
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- B. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- C. vrf 3
- D. vrf 4
- E. vrf 1
- F. sa-nsxedge-01(tier0_dr)> get bgp neighbor
Answer: B,C
NEW QUESTION 31
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)
- A. DFW
- B. Tier-1 Gateway
- C. Segment Port
- D. Group
- E. Segment
Answer: A,D
NEW QUESTION 32
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. traffic predictability
- B. increased north/south bandwidth
- C. traffic load balancing
- D. stateful services leveraged
- E. Failover of services
Answer: B,C
NEW QUESTION 33
Which network virtualization technologies can be used with an Ethernet VPN (EVPN) deployment in NSX-T Data Center? (Choose two.)
- A. Virtual Routing and Forwarding (VRF)
- B. Virtual Extensible Local Area Network (VXLAN)
- C. Open Shortest Path First (OSPF)
- D. Multiprotocol Border Gateway Protocol (MP-BGP)
- E. Multiprotocol Label Switching (MPLS)
Answer: A,B
NEW QUESTION 34
Which network virtualization technologies can be used with an Ethernet VPN (EVPN) deployment in NSX-T Data Center? (Choose two.)
- A. Virtual Routing and Forwarding (VRF)
- B. Virtual Extensible Local Area Network (VXLAN)
- C. Open Shortest Path First (OSPF)
- D. Multiprotocol Label Switching (MPLS)
- E. Multiprotocol Border Gateway Protocol (MP-BGP)
Answer: B,E
NEW QUESTION 35
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)
- A. Add a local endpoint.
- B. Create an IPsec service.
- C. Add a logical switch.
- D. Configure an IPsec session.
- E. Configure a distributed firewall policy.
Answer: A,B,D
NEW QUESTION 36
......
All 2V0-41.20 Dumps and Professional VMware NSX-T Data Center Training Courses: https://www.actualpdf.com/2V0-41.20_exam-dumps.html
Free Test Engine For Professional VMware NSX-T Data Center Certification Exams: https://drive.google.com/open?id=1Y2BNppBgBn2leIIX62Ch9DShFE2cVzDW
