Get 100% Passing Success With True HPE0-V26 Exam! [Jul-2024]
HP HPE0-V26 PDF Questions - Exceptional Practice To Delta - HPE Hybrid Cloud Solutions
NEW QUESTION # 27
Match the RAID level with its capacity overhead. (Each option may be used once, more than once, or not at all.)
Answer:
Explanation:
* RAID 0: This level has zero overhead from capacity perspective, as it uses all the available disk space for data storage without any redundancy or parity. However, it also has no fault tolerance and if one disk fails, all data is lost12.
* RAID 1: This level has capacity of one drive as overhead, as it uses disk mirroring to create an exact copy of data on two or more disks. This provides high reliability and fault tolerance, but reduces the usable disk space by half12
* RAID 5: This level has capacity of one drive as overhead, as it uses disk striping with parity to distribute data and parity blocks across three or more disks. This provides a balance between performance and reliability, as it can tolerate one disk failure without losing data
* RAID 6: This level has capacity of two drives as overhead, as it uses disk striping with double parity to distribute data and two parity blocks across four or more disks. This provides higher reliability and fault tolerance than RAID 5, as it can tolerate two disk failures without losing data12.
NEW QUESTION # 28
You need a tool on a SAN Fabric that Will deliver protocol diagnostic, fabric configuration validation With SPOCK, and assess the health of physical ports with self-healing and fabric monitoring.
It must perform end-to-end diagnostics while using predefined templates to reduce configuration errors.
Which diagnostic tool should be used?
- A. Off-Line Diagnostics
- B. HPE InfoSight
- C. Network Orchestrator
- D. On-Line Diagnostics
Answer: B
Explanation:
Explanation
According to the HPE website, HPE InfoSight is a cloud-based AI platform that delivers global visibility and insights into the health, performance, and capacity of your HPE storage and servers. It can also provide protocol diagnostics, configuration validation with SPOCK, and assess the health of physical ports with self-healing and fabric monitoring1. It can also perform end-to-end diagnostics while using predefined templates to reduce configuration errors1
NEW QUESTION # 29
your customer wants to update the firmware tor multiple HPE proLiant MicroServer Gen10 Plus servers.
Which tool must be used?
- A. HPE Data Services Cloud console
- B. HPE GreenLake central
- C. HPE ILO 5
- D. HPE Composer
Answer: C
Explanation:
Explanation
According to HPE, iLO 5 is a remote management solution that enables you to configure, monitor, and update your HPE servers seamlessly from anywhere in the world1. It also provides firmware update capabilities for HPE ProLiant MicroServer Gen10 Plus servers2. With iLO 5, you can demonstrate how to update the firmware for multiple servers easily and securely.
NEW QUESTION # 30
Match the HPE storage products to their use case.
Answer:
Explanation:
Explanation
HPE MSA2062 -> Provides storage for two HPE ProLiant DL380 Gen10 servers in a branch office1 HPE SimpliVity -> Enterprise HCI with integrated compute storage and data protection2 HPE StoreEver LTO 9 Ultruim 45000 External Tape Drive -> Secures backup data with an air-gap separation3 HPE StoreOnce 3660
-> Provides a disk-based backup functionality with efficient deduplication
NEW QUESTION # 31
Match the correct scaling approach to each strategy
Answer:
Explanation:
Explanation
* Scale-out: Add more servers to do the workload
* Scale-up: Add more resources (such as processors and memory) to existing servers
* Scale-out: Add an additional two-socket system to an existing VMware Cluster
* Scale-up: Add two additional processors to a four-socket system currently equipped with only two processors This is because:
* Scale-out: This is a scaling approach that involves adding more servers or nodes to a system to increase its capacity and performance. It is also known as horizontal scaling. It can help distribute the workload across multiple servers and improve availability and fault tolerance.
* Scale-up: This is a scaling approach that involves adding more resources (such as processors, memory, storage or network) to an existing server or node to increase its capacity and performance. It is also
* known as vertical scaling. It can help improve the performance of a single server and reduce the complexity of managing multiple servers.
NEW QUESTION # 32
Your customer needs a server a maximum Of two processors that will provide high performance, manageability, expansion, and security.
Which server should you recommend?
- A. DL20
- B. DL110
- C. DL560
- D. DL380
Answer: D
Explanation:
Explanation
HPE ProLiant DL380 Gen10 server is a versatile 2U rack server that delivers world-class performance and security for a wide range of workloads. The server supports up to two Intel Xeon Scalable processors with up to 28 cores per processor and up to 3 TB of memory. The server also offers a range of management, expansion, and security features, such as:
* HPE iLO 5 software for remote management and monitoring
* HPE Smart Array controllers for RAID configuration and data protection
* HPE SmartMemory for enhanced performance and reliability
* HPE Flexible Slot power supplies for efficiency and redundancy
* HPE FlexibleLOM adapters for network connectivity options
* HPE Persistent Memory for fast data access and analytics
* HPE Secure Boot and Secure Start for firmware validation and protection
NEW QUESTION # 33
What does an SSD wear Gauge define?
- A. Remaining lifetime for the SSD drive
- B. Maximum speed of the SSD drive
- C. Type of technology used within the SSD drive
- D. Type of interface used for the SSD drive
Answer: A
Explanation:
Explanation
According to HPE, SmartSSD Wear Gauge is a feature that provides an estimate of the remaining useful life of an SSD drive based on its usage patterns . It can help you monitor the health and performance of your SSD drives and plan for replacement or upgrade when needed
NEW QUESTION # 34
you want to quickly 100k up the list price of an HPE hardware component.
Which pre-saves tool has a Quick Quote function?
- A. HPE seismic
- B. HPE Product Blletin
- C. HPE CloudPhysics
- D. HPE smart CID
Answer: B
Explanation:
Explanation
This tool has a Quick Quote function that allows you to quickly look up the list price of an HPE hardware component by entering the product number or selecting from a list of products. You can also add multiple products to a quote and export it to a file or email it to yourself or others.
NEW QUESTION # 35
you are preparing a proposal to refresh your customers existing OL380 GE and G7 servers With newer generations. Before making a decision, your customer needs to know if a refresh is worth the cost.
Which option show the value of the purchase to your customer?
- A. Solution sales Enablement Tool
- B. TCO/ROI Calculator
- C. selective Storage presentation
- D. Smart CID
Answer: B
Explanation:
Explanation
According to HPE, the TCO/ROI Calculator is a tool that helps you compare the total cost of ownership (TCO) and return on investment (ROI) of different server solutions . It can help you demonstrate how a server refresh can reduce costs, improve performance, and increase efficiency for your customer.
NEW QUESTION # 36
Over the next two years, your customer Plans to expand from 25 to 75 employees. They currently have limited space in the server rack and will need to purchase additional servers as the business grows.
Which server type Should you recommend?
- A. ML 350
- B. Synergy12000
- C. Apollo 4200
- D. DL360
Answer: D
Explanation:
Explanation
This is because the HPE ProLiant DL360 Gen10 server is a rack server that delivers security, agility and flexibility without compromise. It supports the Intel Xeon Scalable processor with up to a 60% performance gain and 27% increase in cores, along with 2933 MT/s HPE DDR4 SmartMemory supporting up to 3.0 TB with an increase in performance of up to 82%.1 It also has a small footprint and can fit in a limited space.
NEW QUESTION # 37
A customer who is new to HPE wants to refresh the hardware infrastructure for their VMware environment.
Before meeting the customer, you need to perform an assessment to get a better of their environment Which HPE tool should you use?
- A. GreenLake QuiCk Quote
- B. CloudPhysics
- C. InfoSight
- D. OneView
Answer: B
Explanation:
Explanation
CloudPhysics is a tool that provides a comprehensive assessment of VMware environments and helps identify opportunities for optimization and modernization. CloudPhysics can also generate a ready-to-order bill of materials for HPE solutions based on the customer's workload requirements.
The other options do not seem to be suitable for performing an assessment of a VMware environment. OneView is a tool for managing HPE servers, storage, and networking2. GreenLake Quick Quote is a tool for creating quotes for HPE GreenLake services3. InfoSight is a tool for monitoring and managing HPE storage systems.
NEW QUESTION # 38
You connect to the compute ops Management (COM) through the Green lake Cloud Platform dashboard. The server you want to manage is missing Click where you can add the server so it appears in the CoM.
Answer:
Explanation:
NEW QUESTION # 39
Your customer has multiple workloads that they want to move from a Cloud service prover to an on-premises datacenter. They like the flexibility of their current provider but want dedicated hardware and the ability to scale up and down as business needs change.
Which platform is designed for this customer use case?
- A. HPE Ezmeral Container platform
- B. HPE Superdome Flex platform
- C. HPE Apollo Systems
- D. HPE GreenLake platform
Answer: D
Explanation:
Explanation
HPE GreenLake is an edge-to-cloud platform that delivers cloud services to any location. The platform offers:
* A flexible consumption model that allows customers to pay only for what they use
* A scalable and secure infrastructure that can handle any workload
* A cloud-like experience that simplifies operations and management
* A wide range of services for compute, storage, networking, data protection, and more By migrating to HPE GreenLake, the customer can move their workloads from a cloud service provider to an on-premises data center with dedicated hardware and the ability to scale up and down as business needs change. The customer can also benefit from the agility, performance, and innovation of the cloud services offered by HPE GreenLake.
NEW QUESTION # 40
your customer is looking for a reference architecture from HPE.
Which tool can translate their requirements a validated configuration?
- A. solution sales Enablement TOOI (SSET)
- B. one config Advanced (OCA)
- C. One Config Simple (OCS)
- D. HPE storage STaTS TOOI
Answer: A
Explanation:
Explanation
Solution Sales Enablement Tool (SSET) is a tool that helps you design and validate HPE solutions based on reference architectures. The SSET can translate customer requirements into a validated configuration that meets their needs and budget. The SSET can also generate a bill of materials, a quote, and a proposal for the solution.
NEW QUESTION # 41
An HPE ProLiant DL380 Gen10 Plus server had a power supply issue, and it failed to alert the customer and create a case With HPE support.
What additional step is required to activate this feature?
- A. Add the server to the existing ILO 5 Federation
- B. Apply the ILO 5 Advanced License
- C. Connect the server to an HPE Remote Support Host Server
- D. Enable the Remote Console within iLO 5
Answer: C
Explanation:
Explanation
This is because HPE Remote Support is a service that provides proactive and reactive support for HPE servers, storage, and networking products. It enables automatic fault detection and diagnosis, remote troubleshooting, and case creation and management. To use this service, the server must be connected to an HPE Remote Support Host Server, which is a server that runs the HPE Remote Support software and communicates with the HPE Support Center
NEW QUESTION # 42
Your customer needs to accelerate the performance Of their DL380 Gen10 servers running workloads on more active cores at higher Clock frequencies. The customer wants to know if Core Boosting will help.
What advice Should you provide?
- A. It is only supported on certain Intel processors.
- B. It is an AMD technology so it is unavailable to them
- C. It is a software solution and has performance limitations.
- D. It is only supported on ProLiant DL Gen11 servers.
Answer: A
Explanation:
Explanation
Core Boosting technology uses a relaxed and optimized turbo profile that adapts the processor to specific use cases, configurations, and environments. Core Boosting processors take advantage of extra server power and thermal headroom provided by an innovative HPE voltage regulator design and by cooling technologies.
Consequently, systems that have Core Boosting processors can alleviate common setbacks and maximize processor computing power.
However, Core Boosting option is only supported in ProLiant Gen10 servers with certain Intel processors1
. The HPE ProLiant DL380 Gen10 server data sheet2 lists the supported processors for Core Boosting as:
* Intel Xeon Gold 6148 Processor (20 core, 2.4 GHz, 27.5 MB L3 cache)
* Intel Xeon Gold 6154 Processor (18 core, 3.0 GHz, 24.75 MB L3 cache)
* Intel Xeon Gold 6152 Processor (22 core, 2.1 GHz, 30.25 MB L3 cache)
* Intel Xeon Platinum 8168 Processor (24 core, 2.7 GHz, 33 MB L3 cache) Therefore, if your customer's DL380 Gen10 servers are running workloads on more active cores at higher clock frequencies, they can benefit from Core Boosting technology if they have one of these supported Intel processors.
NEW QUESTION # 43
Your customer has several HPE Nimble Adaptive Flash arrays deployed in the field that are aging and need a refresh. You need to gather information to correctly size the new storage arrays. The information must include the storage IOPS, throughput, latency, storage growth, and data efficiency.
What tool should you use to perform this task without deploying any software on the existing environment?
- A. HPE Assessment Foundry
- B. HPE OneView
- C. HPE InfoSight
- D. HPE CloudPhysics
Answer: C
NEW QUESTION # 44
your customer requires a server that can support a database Of 5TB to run in memory.
Which HPE server family should you recommend?
- A. DL345 Gen10 Plus
- B. DL385 Gen10 plus v2
- C. DL560 Gen10
- D. APollo 4510 Gen10 Plus V2
Answer: C
Explanation:
Explanation
HPE ProLiant DL560 Gen10 Server is a high-density, 4P server with high performance, scalability and reliability. It supports up to 6 TB of memory with 48 DIMM slots and up to 12 TB of memory with 96 DIMM slots when using HPE Persistent Memory . This means that it can support a database of 5 TB to run in memory.
NEW QUESTION # 45
You are troubleshooting a server issue and need to reference a log file tor hardware and configuration changes.
When log file should you review?
- A. HPE OneView Activity Log
- B. ILO Event Log
- C. IML - Integrated Management Log
- D. AHS - Active Health system
Answer: D
Explanation:
Explanation
Active Health System (AHS) is a feature that continuously monitors and records thousands of system parameters and diagnostic telemetry data on HPE ProLiant servers. The AHS log contains information such as hardware and configuration changes, health status, boot issues, and firmware updates. The AHS log can be used for troubleshooting and analysis by HPE support or by the user.
NEW QUESTION # 46
Your customer has a VMware vSphere cluster that needs to be upgraded to a SimpliVity Solution. you need to collect data to recommend the correct SimpliVity Sizing.
What tool will provide this Information?
- A. HPE Cloudphysics
- B. HPE dHCI Sizer
- C. HPE NinjaSTARS
- D. HPE Storage Sizing Tool
Answer: A
Explanation:
Explanation
HPE Cloudphysics is a cloud-based assessment tool that helps customers plan and optimize their VMware vSphere environments. The tool can collect data from the customer's existing environment, such as configuration, performance, capacity, and utilization, and provide insights and recommendations for migrating to HPE SimpliVity. The tool can also compare the costs and benefits of different migration scenarios and generate a detailed report with a bill of materials.
NEW QUESTION # 47
Match the preconfigured HPE workload Profile With Its definition.
Answer:
Explanation:
Explanation
HPE workload profile is one of the HPE Intelligent System Tuning (IST) features and allows you to tune the resources in your HPE ProLiant server by choosing a preconfigured workload profile. The server will automatically configure the BIOS settings to match the selected workload12.
According to the information I found on the web, here is how you can match the preconfigured HPE workload profile with its definition:
* General power efficient compute: This is a default out-of-the-box profile that uses the most common performance settings seen across most application workloads. It also enables power management settings that have minimal impact to overall performance. This profile is recommended for customers that do not typically tune their BIOS for their workload1.
* IO throughput: This profile is intended for configurations that depend on maximum throughput between IO and memory. It disables power management settings that are known to have impact on maximum achievable bandwidth. It also applies settings that benefit NUMA awareness, as best throughput is achieved when the workload is also NUMA aware and optimized
* Graphics processing: This profile is intended for configurations that use GPUs and depend on maximum bandwidth between IO and memory. It disables power management settings that are known to have impact on maximum achievable bandwidth. It also applies settings that benefit NUMA awareness, as best throughput is achieved when the workload is also NUMA aware and optimized1.
* Virtualization -Max Performance: This profile setting will ensure that all available virtualization technologies are enabled and configured for maximum performance. It disables power management settings in favor of delivering maximum performance. Certain virtualization technologies can have possible performance impacts to nonvirtualized environments and can be disabled in other profiles
NEW QUESTION # 48
Your customer has multiple, remote sales offices with one HPE ProL1ant server deployed per Site to run local IT services. They want to centralize the monitoring ana lifecycle management of these servers using a cloud-based offering.
Which tool would demonstrate this functionality?
- A. HPE GreenLake Compute Ops Management
- B. HPE GreenLake Data Services Cloud Console
- C. HPE InoSight
- D. HPE CloudPhysics
Answer: C
Explanation:
Explanation
According to HPE, HPE InfoSight is a cloud-based AI platform that delivers global visibility and insights into the health, performance, and capacity of your HPE storage and servers. It can also centralize the monitoring and lifecycle management of multiple HPE ProLiant servers deployed in remote sites using a single dashboard
1. With HPE InfoSight, you can demonstrate how to simplify and optimize your customer's IT operations from edge to cloud.
NEW QUESTION # 49
Which combination of HPE solutions can provide data validation on MSL3040 and LTO-9 cartridges?
- A. HPE Command View for Tape Libraries and HPE TapeAssure Advanced
- B. HPE Command View for Tape Libraries and HPE StoreEver Data Verification
- C. Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software
- D. HPE Command View for Tape Libraries and Library and Tape Tools
Answer: C
Explanation:
Explanation
Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software: This combination is correct, as Library and Tape Tools (L&TT) is a diagnostic tool that allows you to perform firmware upgrades, run tests, and verify data on tape devices. HPE StoreEver TapeAssure Advanced Software is a software that provides data integrity, performance, health, and utilization reports for tape drives and cartridges, and it works with L&TT to perform data verification2 .
NEW QUESTION # 50
A customer wants to set up a site-to-site replication using Fibre Channel to a Site that is 10 Kilometers away.
What cable must be used to achieve this?
- A. Polymer optical fiber cable
- B. Single-mode fiber optic cable
- C. Multimode fiber optic cable
- D. Flex fiber cable
Answer: B
Explanation:
Explanation
* https://en.wikipedia.org/wiki/Fibre_Channel
* https://www.techtarget.com/searchnetworking/tutorial/Network-cable-history-and-fundamentals-Cabling-t
* https://fibrechannel.org/wp-content/uploads/2016/04/Fibre_Channel_Connectivity_White_Paper_04-06-16 This is because single-mode fiber optic cable has a small core diameter that allows only one mode of light to propagate. This reduces signal attenuation and enables longer transmission distances than multimode fiber optic cable, which has a larger core diameter that allows multiple modes of light to propagate. Single-mode fiber optic cable can support distances up to 40 kilometers for Fibre Channel applications.
NEW QUESTION # 51
......
To pass the HP HPE0-V26 exam, candidates must demonstrate their ability to plan, design, implement, and manage hybrid cloud solutions using HPE products and technologies. HPE0-V26 exam consists of 60 multiple-choice questions that must be completed within 90 minutes. Candidates must achieve a passing score of 68% or higher to earn their certification. The HP HPE0-V26 certification is valid for three years, after which candidates must recertify to maintain their certification status.
HP HPE0-V26 exam is a Delta exam, which means that it is designed for candidates who already hold the HPE ATP - Hybrid IT Solutions V1 or HPE ATP - Hybrid IT Solutions V2 certification. HPE0-V26 exam is intended to measure the candidate’s knowledge and skills in the changes and updates made to the HPE Hybrid Cloud Solutions. HPE0-V26 exam covers various topics related to HPE Hybrid Cloud Solutions such as HPE GreenLake, HPE Synergy, HPE OneView, HPE SimpliVity, and HPE Composable Cloud.
HPE0-V26 dumps - ActualPDF - 100% Passing Guarantee: https://www.actualpdf.com/HPE0-V26_exam-dumps.html
Fast, Hands-On HPE0-V26 exam: https://drive.google.com/open?id=1MbTdTTg9ZyOOkAmLK8hk189xyhoMQMRa
