Free C-IBP-2208 Questions for SAP C-IBP-2208 Exam [Aug-2022]
Validate your C-IBP-2208 Exam Preparation with C-IBP-2208 Practice Test (Online & Offline)
NEW QUESTION 24
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Download the Initial Problem Report in the Data Integration app.
- B. Navigate to the Manage Master Data app and open the Log.
- C. Download the Rejection Report in the Data Integration app.
- D. Navigate to the Master Data Workbook in Excel and open the Log.
Answer: B
NEW QUESTION 25
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.
- A. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.
- B. Excess stock can be generated and will need to be staged in an overflow warehouse.
- C. Minimum capacity utilization will result in pull production occurring.
- D. Capacity leveling will be possible for production and storage resources.
Answer: A,B
NEW QUESTION 26
You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed?Note: There are 2 correct answers to this question.
- A. Planning results can be generated faster by the optimizer.
- B. Push and Pull production models are used by the optimizer.
- C. Prioritization of demand elements one by one is achieved by unconstrained heuristics.
- D. Finite heuristics can achieve demand prioritization and pegging.
Answer: B,D
NEW QUESTION 27
You are working with inventory key figures.What are some of the business scenarios where you can use the Last Period Aggregation function?Note: There are 2 correct answers to this question.
- A. Search for and return the last not null value of the inventory key figure
- B. Calculating how many periods inventory is going to last based on the planned demand
- C. Calculating the value of inventory on any time profile level ensuring flexibility of calculation
- D. Calculating the value of inventory on a weekly basis, using static aggregation from the daily level
Answer: A,B
NEW QUESTION 28
How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle?Note: There are 2 correct answers to this question.
- A. Simulate heuristics run in Supply Review stage
- B. Simulate statistical forecast at the Demand Review stage
- C. Simulate demand sensing inputs for Supply Review
- D. Model inventory turns based on Target Safety stocks
Answer: A,B
NEW QUESTION 29
SAP IBP ensures interoperability with which applications?Note: There are 2 correct answers to this question.
- A. User management in SAP Success Factors
- B. Financial Planning in SAP Analytics Cloud
- C. Business Network in SAP Ariba
- D. Salesforce Sales Cloud
Answer: B,C
NEW QUESTION 30
You are implementing SAP IBP to plan for a supply chain that experiences high seasonality.What supply planning operators can be used in your model to plan stock pre-builds?
- A. Supply optimizer and supply heuristics
- B. Finite heuristics only
- C. Finite and infinite heuristics
- D. Supply optimizer only
Answer: A
NEW QUESTION 31
What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?
- A. Created as type INTEGER and assigned to a simple master data type
- B. Created as type DECIMAL and assigned to a compound master data type
- C. Created as type NVARCHAR and assigned to an external master data type
- D. Created as type INTEGER and assigned to a compound master data type
Answer: B
NEW QUESTION 32
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Minimum lot size
- B. Transportation lead times
- C. Adjusted transport receipts
- D. Aggregated constraints
- E. Maximum lot size
Answer: B,C,E
NEW QUESTION 33
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.
- A. Use the Data Integration app to load suitable data that creates the combinations
- B. Use the Manage Master Data app to create the combinations
- C. Use the Check Mode operator to create the combinations
- D. Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
Answer: A,B
NEW QUESTION 34
What are the relevant use cases for helper key figures?Note: There are 2 correct answers to this questions.
- A. Used when you have more than three inputs at different planning levels in one calculation
- B. Used by end-users in planning views to help visualize cross-period calculations
- C. Used to break down a large calculation into manageable subcalculations
- D. Used at any level of calculation level except the Request Level
Answer: A,C
NEW QUESTION 35
How many different time levels can be selected within one planning view?
- A. All time levels available in the time profile, restricted by global configuration parameter
- B. Only time levels from the base planning level of selected key figures
- C. Only base time levels of the planning area
- D. All time levels available in the time profile
Answer: D
NEW QUESTION 36
You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP.What are the integration tools that you can use with such a setup for data transfer?Note: There are 2 correct answers to this question.
- A. Smart Data Integration
- B. Cloud Integration for Data Services
- C. Cloud Identity Authentication Service
- D. Real-time Integration
Answer: A,B
NEW QUESTION 37
Which parts of the S&OP high-level process would the Inventory planning and optimization process fit into?Note: There are 2 correct answers to this question.
- A. Supply Review, by providing an input to supply network planning
- B. Demand Review, by using the output of demand planning as input into calculations
- C. Reconciliation Review, by providing inventory parameters for one consolidated plan
- D. Management business Review, by providing the inventory targets for endorsement
Answer: C,D
NEW QUESTION 38
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.
- A. These filters can be used together with attribute totals in the same planning view.
- B. You can add (or delete) planning objects to a planning view after these filters are applied.
- C. You can only apply one value-based filter per planning view.
- D. These filters are always applied based on the values stored in the database.
- E. The alerts dashboard is not available if a value-based filter is set for the open planning view.
Answer: C,D,E
NEW QUESTION 39
You are setting up planing with lot sizes.What are some of the properties of lot sizes that you need to be aware of?Note: There are 2 correct answers to this question.
- A. Lot sizes are time-independent master data settings.
- B. Lot sizes are applicable for production and handling quantities.
- C. Periodic lot size setting overrides the minimum lot size.
- D. Lot sizes are applicable for production and transportation quantities.
Answer: A,B
NEW QUESTION 40
What do you need to be aware of when using multiple pairs of key figures in one copy operator? Note: There are 2 correct answers to this question.
- A. If necessary source key figures values are disaggregated.
- B. Copying multiple key figures on different planning levels is not possible.
- C. Copying multiple key figures can be processed sequentially.
- D. If necessary target key figures values are disaggregated.
Answer: A,C
NEW QUESTION 41
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?
- A. IF("PERIODID2" ="$$PERIODID2CU$$...)
- B. IF("PERIODID4" ="$$PERIODID4CU$$...)
- C. IF("PERIODID3" ="$$PERIODID3CU$$...)
- D. IF("PERIODID5" ="$$PERIODID5CU$$...)
Answer: B
NEW QUESTION 42
You are configuring disaggregation for the KF1 key figure in the Planning Areas Model Configuration app.Which methods can you use?Note: There are 3 correct answers to this question.
- A. Disaggregation according to a user-defined expression
- B. Disaggregation according to an equal split
- C. Proportional disaggregation by using KF2 in the expression
- D. Disaggregation in batch triggered by an application job
- E. Disaggregation according to a helper key figure
Answer: A,B,C
NEW QUESTION 43
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?
- A. Incremental production values
- B. Adjusted production interactive values
- C. Production source validity at the start of seasonal peak
- D. Capacity expansion with additional costs
Answer: D
NEW QUESTION 44
What is a prerequisite for modeling outsourced manufacturers with production capacity using the Supply Optimizer?
- A. Model target inventory and stocks at the outsourced manufacturing location
- B. Ensure that the outsourced manufacturing locations have a separate subnetwork
- C. Use production lead times and offsets to manage components at the outsourced manufacturing location
- D. Model relative production costs across internal locations and outsourced manufacturing locations
Answer: D
NEW QUESTION 45
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?
- A. Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.
- B. Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.
- C. Merge analytics and alerts into a new planning area from any sample planning area.
- D. Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.
Answer: D
NEW QUESTION 46
......
SAP C-IBP-2208 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Check Real SAP C-IBP-2208 Exam Question for Free (2022): https://www.actualpdf.com/C-IBP-2208_exam-dumps.html
