Pass Hitachi HQT-4180 With ActualPDF Exam Dumps - Updated on Apr-2023 [Q12-Q31]

Share

Pass Hitachi HQT-4180 With ActualPDF Exam Dumps - Updated on Apr-2023

Fully Updated HQT-4180 Dumps - 100% Same Q&A In Your Real Exam


Hitachi HQT-4180 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Describe how program products are enabled on VSP midrange storage systems
  • Describe the back-end architcture of VSP midrange storage systems
Topic 2
  • Describe the back-end hardware components of VSP midrange storage systems
  • Identify the VSP midrange storage systems documentation
Topic 3
  • Describe the installation and initial configuration procedures for VSP midrange storage systems
  • System Installation
Topic 4
  • Describe the different VSP midrange storage systems models and their specifications
  • System architecture
Topic 5
  • Describe the VSP midrange storage systems drive sparing technology and concepts
  • Back-end Architecture

 

NEW QUESTION 12
Your customer wants to connect multiple servers to a new port on a VSP G700. The correct topology has already been set for the port.
What should you do next?

  • A. Enable Host Group security.
  • B. Enable Port Security.
  • C. Scan for all WWNs.
  • D. Create a Host Group.

Answer: C

 

NEW QUESTION 13
A customer wants to upgrade a VSP G700 to 512 GB RAM capacity.
What is the valid CFM configuration?

  • A. two BM45 per controller
  • B. two BM35 per controller
  • C. two BM35 per system
  • D. one BM45 per controller

Answer: A

 

NEW QUESTION 14
Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.) Choose 2 answers

  • A. adding a DB60 drive tray
  • B. upgrading from G200 to G600
  • C. upgrading from G200 to G800
  • D. adding a DKB

Answer: A,D

 

NEW QUESTION 15
Which tool monitors a VSP E590 system and reports System Information Messages (SIMs)?

  • A. Hitachi Remote Ops SVP Agent
  • B. Storage Navigator
  • C. Hitachi Remote Ops Monitor Agent
  • D. Hitachi Ops Center Protector

Answer: D

 

NEW QUESTION 16
Which manual should be used when performing maintenance actions on VSP midrange storage systems?

  • A. Maintenance Manual
  • B. Product Documentation Library
  • C. Administrator Guide
  • D. Service Guide

Answer: A

 

NEW QUESTION 17
Which three RAID configurations are supported by VSP Midrange systems? (Choose three.)

  • A. 4D + 1P
  • B. 7D + 1P
  • C. 8D + 1P
  • D. 2D + 2D
  • E. 10D + 2P

Answer: A,C,E

 

NEW QUESTION 18
A drive in a 3D + 1P RAID group fails in a VSP G700 and there is no spare drive available.
Which two actions are automatically performed by the system? (Choose two.)

  • A. The Correction Copy process starts.
  • B. The RAID group is placed in Correction Access.
  • C. An alert is generated.
  • D. Dynamic Sparing is started.

Answer: C,D

 

NEW QUESTION 19
Which two statements are correct when adding cache to a VSP E590? (Choose two.)

  • A. Cache Modules must be installed on the CM board.
  • B. This is not supported online.
  • C. CMG0 and CMG1 must have the same DIMM type.
  • D. Cache modules must be installed in CMG1.

Answer: C,D

 

NEW QUESTION 20
You need to replace a broken fan in a VSP E1090.
What is the correct procedure?

  • A. Use the MPC for blocking the fan, then replace it.
  • B. Use the Maintenance Utility for stopping the fan, then replace it.
  • C. Remove the broken fan, then replace it.
  • D. Use Storage Navigator for blocking the fan, then replace it.

Answer: C

 

NEW QUESTION 21
Which program is used to perform the "New Installation" procedure on a VSP F700 system?

  • A. MPC connected to the maintenance LAN port
  • B. SVP Web console
  • C. raidcom CLI
  • D. Hitachi Ops Center Administrator

Answer: D

 

NEW QUESTION 22
You need to replace a broken disk drive on a VSP G700.
What are two prerequisites? (Choose two.)

  • A. You must wear a wrist strap for ESD protection.
  • B. The Drive Box where the drive is located must be powered down.
  • C. You must use the Replace button in the Maintenance Utility before removing the drive.
  • D. The red LED on the drive must be lit.

Answer: A,C

 

NEW QUESTION 23
You are installing a new VSP G700 and are using the Initial Setup Wizard (ISW) for the network configuration.
Which set of IP addresses is configured with the ISW?

  • A. IP addresses of all the ports and of the SVP
  • B. IP addresses of all the ports
  • C. IP addresses of management ports
  • D. IP addresses of maintenance ports

Answer: C

 

NEW QUESTION 24
How many batteries does a VSP E1090 have per controller (CTL)?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 25
You are installing a VSP F370 and you need to connect your laptop to one of the controllers.
What are the two default IP addresses of the maintenance ports of CTL1 and CTL2? (Choose two.)

  • A. 10.0.0.16
  • B. 192.168.0.17
  • C. 10.0.0.17
  • D. 192.168.0.16

Answer: A,D

 

NEW QUESTION 26
......

Latest HQT-4180 Exam Dumps - Valid and Updated Dumps: https://www.actualpdf.com/HQT-4180_exam-dumps.html

Verified HQT-4180 Exam Questions Certain Success: https://drive.google.com/open?id=1BboTnYa267b5azjTlTVBZguaZ7gTQYBp