May 10, 2024 NSE5_FMG-7.0 Exam Crack Test Engine Dumps Training With 82 Questions
Obtain the NSE5_FMG-7.0 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass
Fortinet NSE5_FMG-7.0 certification exam is a vendor-specific exam that is part of Fortinet’s Network Security Expert (NSE) program. NSE5_FMG-7.0 exam consists of 60 multiple-choice questions that are designed to test the candidate’s knowledge of FortiManager 7.0 and its various features and functionality. Candidates are given 90 minutes to complete the exam and must achieve a passing score of 70% or higher to earn the certification.
NEW QUESTION # 10
View the following exhibit.
Which statement is true regarding this failed installation log?
- A. Policy ID 2 will not be installed
- B. Policy ID 2 is installed without a source device
- C. Policy ID 2 is installed in disabled state
- D. Policy ID 2 is installed without a source address
Answer: B
NEW QUESTION # 11
An administrator would like to create an SD-WAN using central management. What steps does the
administrator need to perform to create an SD-WAN using central management?
- A. Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.
- B. You must specify a gateway address when you create a default static route
- C. First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route
- D. Remove all the interface references such as routes or policies
Answer: A
NEW QUESTION # 12
Refer to the exhibit.
An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?
- A. It allows FortiGate to reboot and recover the previous configuration from its configuration file.
- B. It allows FortiGate to reboot and restore a previously working firmware image.
- C. It allows FortiGate to unset central management settings.
- D. It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.
Answer: A
NEW QUESTION # 13
An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?
- A. By an at symbol (@) at the end of the device name
- B. By an Asterisk (*) at the end of the device name
- C. By a Question:
- D. By a dollar symbol ($) at the end of the device name
Answer: B
NEW QUESTION # 14
Which two statements regarding device management on FortiManager are true? (Choose two.)
- A. The maximum number of managed devices for each ADOM is 500.
- B. FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.
- C. FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.
- D. FortiGate devices in HA cluster devices are counted as a single device.
Answer: B,D
NEW QUESTION # 15
Refer to the exhibit.
You ate using the Quick install option to install configuration changes on the managed FortiGate Which two statements correctly describe the result? (Choose two)
- A. It installs device-level changes on the FortiGate device without launching the Install Wizard
- B. It install provisioning template changes on the FortiGate device
- C. It provides the option to preview only the policy package changes before installing them
- D. It installs all the changes in the device database first and the administrator must reinstall the changes on the FodiGate device
Answer: A,B
NEW QUESTION # 16
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?
- A. Allows FortiManager to automatically configure a default route
- B. Allows FortiManager to run real-time debugs on the managed devices
- C. Allows FortiManager to download IPS packages
- D. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
Answer: D
NEW QUESTION # 17
View the following exhibit:
An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the firewall policy for port1?
- A. WAN zone on FortiGate and WAN interface on FortiManager
- B. port1 on both FortiGate and FortiManager
- C. port1 on FortiGate and WAN on FortiManager
- D. WAN zone on FortiGate and WAN zone on FortiManager
Answer: C
NEW QUESTION # 18
View the following exhibit.
An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?
- A. The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted
- B. The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate
- C. The unused objects that are not tied to the firewall policies will be installed on FortiGate
- D. The unused objects that are not tied to the firewall policies in policy package will be deleted from the
Answer: A
Explanation:
FortiManager database
NEW QUESTION # 19
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?
- A. When a new policy package is created, you need to reapply the global policy package to the ADOM.
- B. When a new policy package is created, you need to assign the global policy package from the global
ADOM. - C. When a new policy package is created, you can select the option to assign the global policies to the new package.
- D. When a new policy package is created, it automatically assigns the global policies to the new package.
Answer: D
Explanation:
Global Policy Package is applied at the ADOM level and you have the option to choose which ADOM policy packages you want to exclude (there is no option to choose Policy Packages to include).
NEW QUESTION # 20
An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?
- A. Trainer is not a part of workflow approval group
- B. Trainer does not have full rights over this ADOM
- C. Student, who submitted the workflow session, must first self-approve the request
- D. Trainer must close Student's workflow session before approving the request
Answer: A
NEW QUESTION # 21
View the following exhibit.
When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)
- A. Once initiated, the install process cannot be canceled and changes will be installed on the managed device
- B. Will not create new revision in the revision history
- C. Provides the option to preview configuration changes prior to installing them
- D. Installs device-level changes to FortiGate without launching the Install Wizard
Answer: A,D
NEW QUESTION # 22
Refer to the exhibit.
Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)
- A. It allows making configuration changes for managed devices on FortiManager panes
- B. It supports the FortiManager script feature
- C. You cannot assign the same ADOM to multiple administrators
- D. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate
Answer: A,B
Explanation:
"FortiGate units in the ADOM will query their own configuration every 5 seconds. If there has been a configuration change, the FortiGate unit will send a diff revision on the change to the FortiManager using the FGFM protocol."
NEW QUESTION # 23
Refer to the following exhibit:
Which of the following statements are true based on this configuration? (Choose two.)
- A. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out
- B. The same administrator can lock more than one ADOM at the same time
- C. Unlocking an ADOM will submit configuration changes automatically to the approval administrator
- D. Unlocking an ADOM will install configuration automatically on managed devices
Answer: A,B
NEW QUESTION # 24
Refer to the exhibit.
Given the configuration shown in the exhibit, what can you conclude from the installation targets m the Install On column? (Choose two)
- A. Policy 3 will be installed on all FortiGate devices and vdom belongs to the ADOM
- B. Policy seq # 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target
- C. Policy seq # 1 will be installed on the Remoto-FortiGate root[NAT] and Student[NAT] VDOMs only
- D. Policy seq # 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets
- E. Policy seq # 3 will be skipped because no installation targets are specified
Answer: C,D
NEW QUESTION # 25
View the following exhibit:
An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the firewall policy for port1?
- A. WAN zone on FortiGate and WAN interface on FortiManager
- B. port1 on both FortiGate and FortiManager
- C. port1 on FortiGate and WAN on FortiManager
- D. WAN zone on FortiGate and WAN zone on FortiManager
Answer: C
NEW QUESTION # 26
View the following exhibit.
Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?
- A. The Install On column value represents successful installation on the managed devices
- B. Policy seq#3 will be installed on the Trainer[NAT] VDOM only
- C. Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets
- D. Policy seq#3 will be not installed on any managed device
Answer: C
NEW QUESTION # 27
Refer to the exhibit.
According to the error message why is FortiManager failing to add the FortiAnalyzer device?
- A. The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface
- B. The administrator must use the correct user name and password of the FortiAnalyzer device
- C. The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager
- D. The administrator must use the Add Model Device section and discover the FortiAnaJyzer device
Answer: A
NEW QUESTION # 28
An administrator is replacing a device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
What device name and serial number must the administrator use?
- A. Device name of the original device and serial number of the replacement device.
- B. Device name and serial number of the replacement device.
- C. Device name and serial number of the original device.
- D. Device name of the replacement device and serial number of the original device.
Answer: A
NEW QUESTION # 29
View the following exhibit:
Which two statements are true if the script is executed using the Remote FortiGate Directly (via CLI) option? (Choose two.)
- A. FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.
- B. FortiGate will auto-update the FortiManager's device-level database.
- C. You must install these changes using Install Wizard
- D. FortiManager will create a new revision history.
Answer: B,D
NEW QUESTION # 30
An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?
- A. auto-discovery
- B. port2
- C. virtual-wan-link
- D. port1
Answer: C
NEW QUESTION # 31
What will be the result of reverting to a previous revision version in the revision history?
- A. It will tag the device settings status as Auto-Update
- B. It will modify the device-level database
- C. It will generate a new version ID and remove all other revision history versions
- D. It will install configuration changes to managed device automatically
Answer: B
NEW QUESTION # 32
An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from?
- A. File system
- B. ADOM1
- C. ADOM2
- D. ADOM2 object database
Answer: C
NEW QUESTION # 33
Refer to the exhibit.
You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)
- A. It cannot be canceled once initiated and changes will be installed on the managed device
- B. It will not create a new revision in the revision history
- C. It provides the option to preview configuration changes prior to installing them
- D. It installs device-level changes to FortiGate without launching the Install Wizard
Answer: A,D
Explanation:
FortiManager_6.4_Study_Guide-Online - page 164
The Install Config option allows you to perform a quick installation of device-level settings without launching the Install Wizard. When you use this option, you cannot preview the changes prior to committing. Administrator should be certain of the changes before using this install option, because the install can't be cancelled after the process is initiated.
NEW QUESTION # 34
......
NSE5_FMG-7.0 Exam Dumps Contains FREE Real Quesions from the Actual Exam: https://www.actualpdf.com/NSE5_FMG-7.0_exam-dumps.html
Free Test Engine Verified By NSE 5 Network Security Analyst Certified Experts: https://drive.google.com/open?id=1cw-TcdbvNkHqBGoejtu_tlpt5Vi0pCCO
