[Mar 26, 2022] Pass NetApp NCSIE ONTAP NS0-183 Exam With 61 Questions
Ultimate Guide to Prepare Free Network Appliance NS0-183 Exam Questions and Answer
NetApp NS0-183 Exam Topics:
| Section | Objectives |
|---|---|
| ONTAP Concepts | - Identify general cluster terms used during installation - Identify ONTAP licensing for 9.7 |
| ONTAP Configuration | - Describe how to use NetApp configurations - Demonstrate knowledge of how a node should be added or replaced |
| ONTAP Switches | - Identify the functions of supported switches - Demonstrate knowledge of how to configure/verify configuration requirements |
NEW QUESTION 18
After you install a new cluster with ONTAP 9.5 software, you want to create a new broadcast domain. During the creation of the broadcast domain, you receive an error that there are no free ports available.
What is the reason for this error message?
- A. By Default, all ports are bound to the "Default" broadcast domain. To create a new port, remove the needed ports from the "Default" broadcast domain.
- B. Before you configure a new broadcast domain, you should create a new IPspace.
- C. You can create a new broadcast domain only within the CLI.
- D. By Default, all ports are bound to the "Default" broadcast domain. To create a new port, remove the needed ports from the "Default" broadcast domain and create a new IPspace.
Answer: A
NEW QUESTION 19
You have just completed the installation of a FAS9000 HA pair with ONTAP 9.5.
In this scenario, according to NetApp best practices, which two tests verify the HA failover functionality? (Choose two.)
- A. Disconnect the HA interconnect cabling.
- B. Invoke a system core.
- C. Power cycle the node.
- D. Pull the motherboard out of the slot.
Answer: B,C
NEW QUESTION 20
Click the Exhibit button.
You are setting up a new AFF A700 into a new rack at a customer's site. The customer asks you to plan for simplified future growth.
Referring to the exhibit, how would you satisfy this requirement?
- A. Option 1
- B. Option 2
- C. Option 4
- D. Option 3
Answer: B
NEW QUESTION 21
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. Active IQ Config Advisor
- B. Cloud Insights
- C. System Diagnostics
- D. Active IQ Unified Manager
Answer: C
NEW QUESTION 22
You just installed two nodes into an existing ONTAP cluster.
When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?
- A. No NTP server is configured for this node.
- B. The node-management LIF has to be on e0M for NTP to work.
- C. The NTP is adjusting in small increments.
- D. The DNS is not configured for this node.
Answer: D
NEW QUESTION 23
You are deploying a cluster with four AFF A300 nodes and Cisco 3232C switches. When you arrive at the customer's site, you notice that there are multiple breakout cables and four Cisco 3232C switches. In this scenario, which statement is true?
- A. A 4-node AFF A300 cluster requires two Cisco 3232C switches for the cluster interconnect and two for management.
- B. A 4-node AFF A300 cluster requires four Cisco 3232C switches.
- C. Cisco best practices require four Cisco 3232C switches for high availability.
- D. Your customer ordered a MetroCluster IP configuration.
Answer: D
NEW QUESTION 24
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?
- A. multitenancy node SVM
- B. system SVM
- C. data SVM
- D. admin SVM
Answer: C
NEW QUESTION 25
Click the Exhibit button.
A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?
- A. RAID_DP
- B. RAID1
- C. RAID4
- D. RAID_TEC
Answer: D
NEW QUESTION 26
An iSCSI LIF fails to migrate during a storage failover test.
In this scenario, why did the LIF not migrate?
- A. LIFs that serve block protocols do not failover.
- B. LIF failover was not enabled.
- C. A failover port was not defined.
- D. The failover policy was not configured.
Answer: A
NEW QUESTION 27
You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)
- A. multipath HA
- B. quadpath HA
- C. single path
- D. mixed-mode
Answer: A,B
NEW QUESTION 28
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)
- A. Epsilon voting
- B. intracluster SnapMirror
- C. cluster database replication
- D. remote cluster peering
- E. intercluster SnapMirror
Answer: C,D,E
NEW QUESTION 29
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. intercluster LIF
- B. SVM management LIF
- C. node management LIF
- D. SVM data LIF
Answer: A
NEW QUESTION 30
Click the Exhibit button.
You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.
Referring to the exhibit, to which port should the redundant management network be cabled?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 31
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure a remote tier.
- B. Configure protocols.
- C. Configure aggregates.
- D. Configure cluster LIFs.
Answer: C
NEW QUESTION 32
During handover, a customer asks you how to obtain support from NetApp after installation.
What are two responses in this scenario? (Choose two.)
- A. Send an AutoSupport message from the system.
- B. Visit mysupport.netapp.com
- C. Contact Global Support by telephone.
- D. Visit.
Answer: B,C
NEW QUESTION 33
......
Pass NS0-183 Tests Engine pdf - All Free Dumps: https://www.actualpdf.com/NS0-183_exam-dumps.html
