[Mar 08, 2024] Today Updated DES-4122 Exam Dumps Actual Questions
DES-4122 exam dumps with real EMC questions and answers
NEW QUESTION # 17
A technician working with a Dell EMC PowerEdge 1 take corrective action?
- A. Check the LCC Log
Check PSU LED
Reseat the PSU - B. Check the LCC Log
Check PSU LED
Reseat the CPU - C. Check the System Event Log
Check PSU LED
Do a virtual reseat of the iDRAC - D. Check the System Event Log
Check PSU LED
Reseat the PSU
Answer: C
NEW QUESTION # 18
Which card connects to the PCI bus, is physically smaller than a on the system board of a Dell EMC PowerEdge 14G server?
- A. NDC
- B. FPGA
- C. OCP
- D. PCIe
Answer: D
NEW QUESTION # 19
How can a technician know whether IDRAC9 System Lockdown mode is enabled?
- A. Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots
- B. Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots
- C. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots
- D. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots
Answer: A
NEW QUESTION # 20
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?
- A. Enable the Collect System Inventory On Restart (CSIOR) attribute
- B. Install and configure a repository manager
- C. Enable the Match Firmware of Replaced Part setting in the system BIOS
- D. Configure servers to access the remote firmware repository
Answer: C
NEW QUESTION # 21
An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment The inventory consists of:
The server power configuration will be set for gnd redundancy The management switch is 1000 Base-T and the top of rack switches 10Gb What additional component(s) is needed for this configuration?
- A. Dell Networking, cable, 40GbE (QSFP+) to 4 x 10GbE SFP+ passive copper breakout cable, 3 meters - qty 2
- B. Hot-plug power supply, 750 W - qty 1
- C. Hot-plug power supply, 1100W - qty 1
- D. C20 to C21, PDU style, 250 V, 16 Amp, 3 5 meters power cord - qty 2
Answer: B
NEW QUESTION # 22
For security reasons, the Dell EMC PowerEdge server power button must be disabled. Use the System Setup Utility in the simulator to disable the power button. When you have finished using the simulator, click Next.
- A. Send us your suggestion for this simulation task.
- B. A technician wants to
Answer: A
NEW QUESTION # 23
Match each RAID level to its characteristic.
Answer:
Explanation:
NEW QUESTION # 24
Starting from which Dell EMC PowerEdge server hardware generation is the Micro SD card in the IDSDM/vFlash module supported?
- A. 12G
- B. 14G
- C. 11G
- D. 13G
Answer: D
NEW QUESTION # 25
For a temporary migration task the CPU core count on the Dell EMC PowerEdge R640 server needs to be reduced to 8 because the installed application will not work due to license restrictions. Use the simulator to apply the change so the application can be installed.
When you have finished using the simulator, click Next.
- A. Send us your suggestion for this simulation task.
- B. A technician wants to
Answer: A
NEW QUESTION # 26
Which processor configuration is used by the Dell EMC PowerEdge R740 server?
- A. 2 socket AMD
- B. 2 socket Intel
- C. 4 socket AMD
- D. 4 socket Intel
Answer: B
NEW QUESTION # 27
What is a key distinction between 1DRAC8 and 1DRAC9?
- A. iDRAC8 offers HTML5 based GUI
- B. iDRAC8 default credentials are customer orderable
- C. iDRAC9 offers HTML5 based GUI
- D. iDRAC9 default credentials are root/calvin orderable only
Answer: B
NEW QUESTION # 28
What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?
- A. OpenManage Essentials
- B. SupportAssist Enterprise
- C. iDRAC9
- D. iSM
Answer: B
NEW QUESTION # 29
Match each RAID level to its characteristic.
Answer:
Explanation:
NEW QUESTION # 30
An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server Which BIOS settings need to be used for installing the Windows server?
A)
B)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION # 31
What happened on April 30, 2019?
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION # 32
A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?
- A. Number of Cores per Processor
- B. HyperThreading
- C. Virtualization Technology
- D. System Profile
Answer: D
NEW QUESTION # 33
......
Exam Sure Pass EMC Certification with DES-4122 exam questions: https://www.actualpdf.com/DES-4122_exam-dumps.html
DES-4122 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1_P1Wsx9tunOgE5yDmhUKaC0QIvWzz9xz
