Free 300-710 Exam Files Downloaded Instantly 100% Dumps & Practice Exam
Free Exam Updates 300-710 dumps with test Engine Practice
The exam is a 90-minute test consisting of 60-70 questions that assess the candidate's knowledge of Cisco Firepower NGFWs and FMCs. The exam covers a wide range of topics, including NGFW and FMC architecture, access control policies, security intelligence, network analysis policies, and troubleshooting. The exam is available in English and Japanese and can be taken at any Pearson VUE testing center worldwide.
The Cisco 300-710 exam, also known as Securing Networks with Cisco Firepower, is designed for IT professionals who want to enhance their skills and knowledge in network security. The exam is part of the Cisco Certified Network Professional Security (CCNP Security) certification track, which validates the skills required to secure Cisco networks. The Cisco 300-710 exam focuses on Cisco Firepower Threat Defense, an advanced security solution that provides comprehensive threat protection for organizations of all sizes.
NEW QUESTION # 31
When deploying a Cisco ASA Firepower module, an organization wants to evaluate the contents of the traffic without affecting the network. It is currently configured to have more than one instance of the same device on the physical appliance Which deployment mode meets the needs of the organization?
- A. passive monitor-only mode
- B. passive tap monitor-only mode
- C. inline mode
- D. inline tap monitor-only mode
Answer: A
NEW QUESTION # 32
Which process should be checked when troubleshooting registration issues between Cisco FMC and managed devices to verify that secure communication is occurring?
- A. sftunnel
- B. dhclient
- C. fpcollect
- D. sfmgr
Answer: A
NEW QUESTION # 33
What is a result of enabling Cisco FTD clustering?
- A. Integrated Routing and Bridging is supported on the master unit.
- B. All Firepower appliances can support Cisco FTD clustering.
- C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
- D. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config- guide-v64/clustering_for_the_firepower_threat_defense.html
NEW QUESTION # 34
With Cisco FTD software, which interface mode must be configured to passively receive traffic that passes through the appliance?
- A. firewall
- B. IPS-only
- C. tap
- D. ERSPAN
Answer: D
NEW QUESTION # 35
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION # 36
What is a characteristic of bridge groups on a Cisco FTD?
- A. In routed firewall mode, routing between bridge groups must pass through a routed interface.
- B. Routing between bridge groups is achieved only with a router-on-a-stick configuration on a connected router
- C. In transparent firewall mode, routing between bridge groups is supported
- D. In routed firewall mode, routing between bridge groups is supported.
Answer: D
NEW QUESTION # 37
A network engineer wants to add a third-party threat feed into the Cisco FMC for enhanced threat detection Which action should be taken to accomplish this goal?
- A. Enable Rapid Threat Containment using STIX and TAXII
- B. Enable Threat Intelligence Director using REST APIs
- C. Enable Threat Intelligence Director using STIX and TAXII
- D. Enable Rapid Threat Containment using REST APIs
Answer: C
NEW QUESTION # 38
What are the minimum requirements to deploy a managed device inline?
- A. inline interfaces, MTU, and mode
- B. passive interface, MTU, and mode
- C. inline interfaces, security zones, MTU, and mode
- D. passive interface, security zone, MTU, and mode
Answer: A
NEW QUESTION # 39
Which connector is used to integrate Cisco ISE with Cisco FMC for Rapid Threat Containment?
- A. pxGrid
- B. FTD RTC
- C. ISEGrid
- D. FMC RTC
Answer: A
NEW QUESTION # 40
While configuring FTD, a network engineer wants to ensure that traffic passing through the appliance does not require routing or Vlan rewriting. Which interface mode should the engineer implement to accomplish this task?
- A. Inline set
- B. Inline tap
- C. passive
- D. transparent
Answer: D
NEW QUESTION # 41
The network administrator wants to enhance the network security posture by enabling machine learning tor malware detection due to a concern with suspicious Microsoft executable file types that were seen while creating monthly security reports for the CIO. Which feature must be enabled to accomplish this goal?
- A. Spero
- B. dynamic analysis
- C. static analysis
- D. Ethos
Answer: A
NEW QUESTION # 42
A mid-sized company is experiencing higher network bandwidth utilization due to a recent acquisition The network operations team is asked to scale up their one Cisco FTD appliance deployment to higher capacities due to the increased network bandwidth. Which design option should be used to accomplish this goal?
- A. Deploy multiple Cisco FTD HA pairs to increase performance
- B. Deploy multiple Cisco FTD HA pairs in clustering mode to increase performance
- C. Deploy multiple Cisco FTD appliances in firewall clustering mode to increase performance.
- D. Deploy multiple Cisco FTD appliances using VPN load-balancing to scale performance.
Answer: C
NEW QUESTION # 43
An engineer is troubleshooting application failures through an FTD deployment. While using the FMC CLI, it has been determined that the traffic in question is not matching the desired policy. What should be done to correct this?
- A. Use the system support firewall-engine-debug command to determine which rules the traffic matching and modify the rule accordingly.
- B. Use the system support network-options command to fine tune the policy.
- C. Use the system support application-identification-debug command to determine which rules the traffic matching and modify the rule accordingly.
- D. Use the system support firewall-engine-dump-user-identity-data command to change the policy and allow the application though the firewall.
Answer: A
Explanation:
Section: Management and Troubleshooting
NEW QUESTION # 44
After using Firepower for some time and learning about how it interacts with the network, an administrator is trying to correlate malicious activity with a user Which widget should be configured to provide this visibility on the Cisco Firepower dashboards?
- A. Correlation Events
- B. Current Sessions
- C. Current Status
- D. Custom Analysis
Answer: A
NEW QUESTION # 45
An organization has a compliancy requirement to protect servers from clients, however, the clients and servers all reside on the same Layer 3 network Without readdressing IP subnets for clients or servers, how is segmentation achieved"?
- A. Change the IP addresses of the clients, while remaining on the same subnet.
- B. Deploy a firewall in transparent mode between the clients and servers.
- C. Change the IP addresses of the servers, while remaining on the same subnet
- D. Deploy a firewall in routed mode between the clients and servers
Answer: D
NEW QUESTION # 46
An engineer wants to add an additional Cisco FTD Version 6.2.3 device to their current 6.2.3 deployment to create a high availability pair.
The currently deployed Cisco FTD device is using local management and identical hardware including the available port density to enable the failover and stateful links required in a proper high availability deployment. Which action ensures that the environment is ready to pair the new Cisco FTD with the old one?
- A. Change from Cisco FDM management to Cisco FMC management on both devices and register them to FMC.
- B. Ensure that the configured DNS servers match on the two devices for name resolution.
- C. Factory reset the current Cisco FTD so that it can synchronize configurations with the new Cisco FTD device.
- D. Ensure that the two devices are assigned IP addresses from the 169 254.0.0/16 range for failover interfaces.
Answer: A
NEW QUESTION # 47
......
How to book the Securing Networks with Cisco Firepower (300-710 SNCF) Exam
Typically, up to six weeks in advance and as late as the same day, you can schedule an exam. You have to follow these steps in order to participate for the Securing Networks with Cisco Firepower (300-710 SNCF) Exam:
- Step 1: Visit Pearson VUE website by clicking here
- Step 3: Login or create an account
- Step 3: Enter the exam number i.e. 300-710
- Step 3: Follow the details on the website
- Step 4: Pay for your exam via credit card or exam vouchers
Provide Valid Dumps To Help You Prepare For Securing Networks with Cisco Firepower Exam: https://www.actualpdf.com/300-710_exam-dumps.html
Updated Verified 300-710 dumps Q&As - 100% Pass Guaranteed: https://drive.google.com/open?id=1Lo1UY7QDokTD__zQkBfqmebbhL2EUynM
