Download Free BICSI OSP-002 Real Exam Questions Download
Latest BICSI OSP-002 Real Exam Dumps PDF
The BICSI OSP-002 exam is designed for professionals who are involved in the design, development, and implementation of outside plant (OSP) telecommunications infrastructure. This exam is intended for individuals who are responsible for ensuring the OSP infrastructure meets the requirements of the organization and the customers it serves. The OSP-002 exam covers a wide range of topics, including OSP design principles, industry standards and regulations, cabling and grounding systems, fiber optic and copper cabling technologies, and OSP project management. Passing this exam demonstrates the expertise and knowledge required to design and implement OSP infrastructure that meets industry standards and customer needs.
NEW QUESTION # 23
A wireless antenna is also known as a \_\_\_\_\_\_\_\_\_\_.
- A. WC (wireless cell)
- B. Access point
- C. Wireless router
- D. Hot spot
Answer: B
NEW QUESTION # 24
Physical contact (PC) polish on connectors is designed to reduce \_\_\_\_\_\_\_\_\_\_.
- A. Polishing time
- B. Loss and reflectance
- C. Reflectance
- D. Loss
Answer: B
NEW QUESTION # 25
What is the core size of 1300 - 1550 nm singlemode fiber?
- A. 9 microns
- B. 50 microns
- C. 63.5 microns
- D. 5 mm
Answer: A
NEW QUESTION # 26
How much untwist is allowed on Cat 5/5e/6 pairs at a punchdown block to maintain specified performance?
- A. 1/4 inch (6 mm)
- B. 2 inches (50 mm)
- C. 1/2 inch (13 mm)
- D. 1 inch (25 mm)
Answer: C
NEW QUESTION # 27
Always keep \_\_\_\_\_\_\_\_\_\_ on connectors when not connected to equipment or being tested.
- A. Mating adapters
- B. Strain relief boots
- C. Sticky tape
- D. Dust caps
Answer: D
NEW QUESTION # 28
The international standard for structured cabling is \_\_\_\_\_\_\_\_?
- A. ISO-11801
- B. TIA-568
- C. ISO-9000
- D. IEC-0001
Answer: A
NEW QUESTION # 29
What is the installed cable plant from work area outlet jack to the patch panel in the telecom closet called?
- A. Link cable
- B. Channel
- C. Permanent link
- D. Patchcord
Answer: C
NEW QUESTION # 30
For planning office layout, each user should be allocated \_\_\_\_\_\_\_ floor space.
- A. 3 sq m
- B. 100 sq ft
- C. Adequate
- D. shared
Answer: B
NEW QUESTION # 31
___________ should be used to bundle cables since _________.
- A. Hook and loop cable ties, tight cable ties can affect cable performance
- B. Cable ties, loose cables are a safety hazard
- C. Cable ties tightened with guns, cables should not be allowed to move around
- D. Rubber bands, they stretch
Answer: A
NEW QUESTION # 32
UTP cable installed above the ceiling in hot climates may not \_\_\_\_\_\_\_\_\_\_.
- A. Meet crosstalk specs
- B. Be fire safe
- C. Pass certification tests
- D. Support full standard link distances
Answer: D
NEW QUESTION # 33
What is the main characteristic of unshielded twisted pair Category 5e or Category 6 cable that gives it high frequency performance?
- A. High performance plastics in the insulation of the pairs
- B. The connectors
- C. The rate of twists in the pairs of wires
- D. The size of the conductors
Answer: C
NEW QUESTION # 34
What kinds of connection to the cable does a UTP jack typically have?
- A. Snap-in contacts
- B. 66 punchdown
- C. 110 punchdown
- D. Solder connections
Answer: C
NEW QUESTION # 35
Reference cables must match the \_\_\_\_\_\_\_\_ of the cables being tested.
- A. Fiber size and loss specification
- B. Fiber size and connector type
- C. Fiber size and type
- D. Connector type
Answer: B
NEW QUESTION # 36
An ICT distribution designer is coordinating with local agencies for an upcoming campus improvement project which could affect the design. Which two of the following listed items will MINIMIZE design changes once the project begins? (Choose two.)
- A. Approval of permit by AHJ - local Fire Marshal
- B. Identification of maintenance holes, hand holes locations
- C. Hand off of documentation to project manager
- D. Identification and agreement of conduit pathway routes
- E. Approval of budget by chief financial officer (CFO)
Answer: B,D
NEW QUESTION # 37
Singlemode fiber has __________ bandwidth than multimode fiber.
- A. More
- B. Less
- C. The same
Answer: A
NEW QUESTION # 38
A category-rated UTP cable (Cat 3/5e/6/6A) used for horizontal cabling has \_\_\_\_\_\_ color coded pairs of wires.
- A. 0
- B. 1
- C. Any even number
- D. 2
Answer: D
NEW QUESTION # 39
In an industrial environment, fiber is most often used to________.
- A. Withstand high temperatures
- B. Tolerate physical abuse
- C. Immunity to electrical noise prevents interference
- D. Provide ultra-high speed connections to machines
Answer: C
NEW QUESTION # 40
To maintain rated performance, twists in each pair must be maintained to within \_\_\_\_\_\_\_ of the termination.
- A. 1/2 inch
- B. 2.5 cm
- C. 25 mm
- D. 1 inch
Answer: A
NEW QUESTION # 41
How many methods are included in standards for setting the "0 dB' reference for loss testing?
- A. Four
- B. Three
- C. One
- D. Two
Answer: B
NEW QUESTION # 42
What UTP installation tool is needed for teminating most Cat 5e/6 jacks?
- A. Spudger
- B. Punchdown tool with 110 blade
- C. Crimper
- D. Punchdown tool with 66 blade
Answer: B
NEW QUESTION # 43
Wireless networks are really used to replace ________.
- A. Structured cabling
- B. The patchcord that connects a PC to a wall outlet connection
- C. Backbone cabling
- D. Routers
Answer: B
NEW QUESTION # 44
One cannot emphasize strongly enough the value of \_\_\_\_\_\_\_\_\_.
- A. Standards
- B. Fiber optics
- C. Documentation
- D. Cabling
Answer: C
NEW QUESTION # 45
......
PDF (New 2023) Actual BICSI OSP-002 Exam Questions: https://www.actualpdf.com/OSP-002_exam-dumps.html
OSP-002 Exam Dumps, OSP-002 Practice Test Questions: https://drive.google.com/open?id=1Xj9CYr2agmYsjG2vEbMICytStQMhBZEu
