[Dec 31, 2021] New 350-601 Exam Dumps with High Passing Rate
Get 350-601 Braindumps & 350-601 Real Exam Questions
Introduction to Cisco 350-601: Implementing and Operating Cisco Data Center Core Technologies Exam
This 350-601 exam test helps you prepare for the Cisco CCNP Data Center and CCIE Data Center certifications for advanced-level data center roles. In this course, you will master the skills and technologies you need to implement data center compute, LAN, and SAN infrastructure. You will also learn the essentials of automation and security in data centers. You will gain hands-on experience deploying, securing, operating, and maintaining Cisco data center infrastructure including Cisco MDS Switches and Cisco Nexus Switches; Cisco Unified Computing System (Cisco UCS) B-Series Blade Servers, and Cisco UCS C-Series Rack Servers.
NEW QUESTION 66
Refer to the exhibit.
What must be connected to clear the HA NOT READY status?
- A. management ports
- B. network uplinks
- C. Layer 1-Layer 2 ports
- D. server chassis
Answer: D
NEW QUESTION 67
An engineer implements an ACI fabric and must implement microsegmentation of endpoints within the same IP subnet using a network-based attribute. The attribute mapping must allow IP subnet independence. Which attribute must be selected?
- A. Tag
- B. Custom
- C. MAC address
- D. IP
Answer: D
NEW QUESTION 68
AN engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch.
event manager applet Backup-config
event timer watchdog time 1800 name timer
event cli match "copy running-config startup-config"
what is the result of applying this configuration?
- A. It executes the copy running-config startup-config command.
- B. It generates an error because no action is mentioned.
- C. It blocks the copy running-config startup-config command.
- D. It saves the running configuration every 1800 seconds.
Answer: D
NEW QUESTION 69
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error massage. Which method can be used before application profile can be configured?
- A. POST to aaaRefresh
- B. GET to aaaListDomains
- C. POST to aaaLogin
- D. POST to aaaLogout
Answer: C
Explanation:
Explanation
NEW QUESTION 70
What are two types of FC/FCoE oversubscription ratios? (Choose two.)
- A. edge ISL bandwidth to core ISL bandwidth
- B. switch processing power to end-node processing power
- C. server storage to end-node count
- D. host bandwidth to storage bandwidth
- E. port bandwidth to uplink bandwidth
Answer: A,D
NEW QUESTION 71
Refer to the exhibit.
An engineer configures FCIP on a Cisco MDS 9000 Series switch. What is the result of implementing the configuration?
- A. Mode2 is enabled by default.
- B. Compression is performed by using software.
- C. Compression is performed by using hardware
- D. The switch attempts to make two TCP connections
Answer: C
NEW QUESTION 72
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created.
The cluster IP address is 10.68.68.68. Which command set creates this certificate request?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 73
An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is named kr2016 needs to be created.
The cluster IP address is 10.68.68.68. Which command set creates this certificate request?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 74
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)
- A. back up the configuration
- B. free up space on the USB3 device by deleting old Cisco NX-OS image files
- C. disable Cisco Fabric Services
- D. make the primary supervisor the active supervisor
- E. check the impact of the upgrade using the show install all impact command
Answer: A,E
NEW QUESTION 75
Refer to the exhibit.
Which command needs to be added to the line starling with the "file" keyword to have the generated running-config file with the name 'fusion-config_' and current date?
- A. str.('fusion-config_') + date
- B. ('fusion-config_') + date
- C. string(('fusion-config_') + date)
- D. ('fusion-config_ + date')
Answer: A
NEW QUESTION 76
Refer to the exhibit.
Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?
- A. IPv4 multicast address
- B. IPv4 unicast address
- C. IPv4 anycast address
- D. IPv4 gateway address
Answer: B
NEW QUESTION 77
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error message.
Which method can be used before the application profile can be configured?
- A. POST to aaaRefresh
- B. GET to aaaListDomains
- C. POST to aaaLogin
- D. POST to aaaLogout
Answer: C
Explanation:
Section: Automation
NEW QUESTION 78
An engineer configures a storage environment for a customer with high-security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time. Which two configuration sets must be used to meet these requirements? (Chose two.)
- A. Option A
- B. Option E
- C. Option B
- D. Option C
- E. Option D
Answer: A,D
NEW QUESTION 79
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Answer:
Explanation:
Explanation
2,4,5 - NAS 1,3 - SAN
NEW QUESTION 80
Which mroute state is created when Bidirectional PIM is deployed at a site?
- A. MVPN Type-7
- B. MVPN Type-6
- C. S.G
- D. *.G
Answer: D
NEW QUESTION 81
A network engineer must prevent data comuption due to cross fabric communication in an FCoE environment.
Which configuration must be applied to the Cisco Nexus Unified Switches to achieve this objective?
- A. Switch(config) # no fcoe fcf-priority
- B. Switch(config)#fcoe fcmap 0e,fc,2a
- C. Switch(config-if)# no fcoe fcf-priority 0
- D. Switch(config-if) # shutdown lan
Answer: B
NEW QUESTION 82
What is a feature of NFS?
- A. zone-based access control
- B. Kerberos-based security model
- C. role-based access control
- D. block-based file access
Answer: B
NEW QUESTION 83
An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)
- A. Configure the switchport monitor under interface fc2/2
- B. Configure switchport speed 4000 under interface fc2/2.
- C. Configure session type fc under monitor session 1.
- D. Configure the switchport mode SD under interface tc2/1.
- E. Configure the switchport mode SD under interface fc2/2.
Answer: A,B
NEW QUESTION 84
An engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generate a message.
What Configuration will accomplish this task?
- A. event manager applet fcns_policy
event fcns entries max-per-switch 1500
action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit action 2.0 policy-default - B. event manager applet fcns_policy
action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit action 2.0 event-default - C. event manager applet fcns_policy override fcns_entries_max_per_switch event fcns entries max-per-switch 1500 action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit
- D. event manager applet fcns_policy override fcns_entries_max_per_switch action 1.0 syslog priority errors "CNS DB entries have reached the EEM limit" action 2.0 policy-default
Answer: C
NEW QUESTION 85
Which two settings must be configured before enabling a Cisco UCS Manager domain for Cisco Intersight connectivity? (Choose two.)
- A. SMTP servers
- B. SMTP reply-to-address
- C. NTP servers
- D. syslog redirection
- E. DNS servers
Answer: C,E
Explanation:
Explanation
NEW QUESTION 86
Refer to the exhibit.
What is the result of running the command presented?
- A. Multicast traffic forwarding is suspended.
- B. MRIB is flushed.
- C. PIM join messages are suspended.
- D. The PIM database is deleted.
Answer: D
Explanation:
Section: Network
NEW QUESTION 87
Refer to the exhibit.
What be connected to clear the HA NOT READY status?
- A. management ports
- B. network uplinks
- C. Layer 1-Layer 2 ports
- D. server chassis
Answer: D
NEW QUESTION 88
......
350-601 Dumps To Pass Cisco Exam in 24 Hours - ActualPDF: https://www.actualpdf.com/350-601_exam-dumps.html
Cisco 350-601 Actual Questions and Braindumps: https://drive.google.com/open?id=1VxcCc1A3eBcHaO8eAfatyp3Qy6mj3oRI
