[Dec-2025] 100% Actual C-TS414-2023 dumps Q&As with Explanations Verified & Correct Answers
C-TS414-2023 Dumps with Free 365 Days Update Fast Exam Updates
NEW QUESTION # 14
When you post a good receipt, where does the system check the current inspection stage for a material/vendor combination for upcoming inspection .
- A. Characteristic
- B. Inspection Plan
- C. Sampling scheme
- D. Quality level
Answer: D
NEW QUESTION # 15
The Determine Tasks function can be used during quality notification processing. What can be defined in the response profile? Note: There are 2 correct answers to this question.
- A. Notification type
- B. Task code
- C. Task code group
- D. Cause code
Answer: B,C
Explanation:
The response profile (transaction QMSM) in QM notifications defines automatic tasks via the "Determine Tasks" function:
* Task Code Group (A): Specifies the group (e.g., from catalog type 2) containing task codes, defining the task category (SPRO > QM > Quality Notifications > Response Profile).
* Task Code (C): The specific code within the group (e.g., "Investigate") is defined, detailing the task to be created.
* Cause Code (B): Cause codes (catalog type 5) are for problem analysis, not task definition.
* Notification Type (D): The type is set at the notification level, not in the response profile.
Thus, "Task code group" and "Task code" are the correct answers.References: SAP Help Portal - "Response Profiles in QM"; SAP S/4HANA QM User Guide - "Notification Tasks".
NEW QUESTION # 16
your consumer want the section of a usage decision code to automatically trigger a goods movement . Where do you make the settings to enable this ?
- A. in the code groups and code
- B. in the movement type
- C. in the selected set .
- D. in the inspection type
Answer: C
NEW QUESTION # 17
You must assign a certificate profile for outgoing certificates to a key combination. What key combination can be used without additional settings?
- A. Material Type
- B. Customer
- C. Material
- D. Material/Customer
Answer: D
Explanation:
In SAP S/4HANA Cloud Private Edition, Quality Management, certificate profiles for outgoing certificates (e.
g., quality certificates issued to customers) are assigned to specific key combinations that define the context in which the certificate is generated. The certificate profile determines which characteristics and data are included on the certificate, typically for an outbound delivery process. The key combination "Material
/Customer" is the standard option that can be used without additional configuration because it aligns with the default settings in SAP's Quality Management (QM) module for certificate processing.
* Material/Customer: This combination links the certificate profile to a specific material and customer, allowing the system to retrieve relevant inspection results and batch data for that pairing. It is preconfigured in the standard SAP system under the certificate profile assignment in Customizing (SPRO > Quality Management > Quality Certificates > Outgoing > Define Certificate Profiles). No additional settings are required because this is a common business scenario where certificates are tailored to customer-specific requirements for a material.
* Material: Assigning a certificate profile only to a material requires additional settings to ensure the system knows which customer or delivery context to apply it to, as certificates are typically customer- facing. This option is valid but not default without further configuration.
* Material Type: This is too broad and not directly supported as a standalone key combination for certificate profiles without custom enhancements, as certificate profiles need more specific granularity.
* Customer: Assigning to just a customer lacks the material context, making it incomplete for certificate generation without additional setup.
Thus, "Material/Customer" is the most straightforward and default-supported key combination.References:
SAP Help Portal - "Quality Certificates in QM" (Outgoing Certificates); SAP S/4HANA Cloud Private Edition, Quality Management Certification Guide (C_TS414_2023).
NEW QUESTION # 18
You are using the SAP Fiori app "Record Inspection Results" in the quality inspection. Which process steps are supported by this app? Note: There are 3 correct answers to this question.
- A. Assign documents and links to an inspection characteristic
- B. Add unplanned inspection operations
- C. Add inspection method to an inspection characteristic
- D. Add remarks to an inspection characteristic
- E. Add unplanned inspection characteristics
Answer: A,D,E
Explanation:
The SAP Fiori app "Record Inspection Results" (App ID: F2170) supports:
* Add Unplanned Inspection Characteristics (B): Users can add unplanned characteristics (e.g., as complete or incomplete copies) to an operation during recording, enhancing flexibility.
* Add Remarks to an Inspection Characteristic (C): The app allows adding comments or notes to characteristics, supporting documentation (visible in the characteristic details).
* Assign Documents and Links to an Inspection Characteristic (D): Documents (e.g., via DMS) or links can be attached to characteristics in the app for reference.
* Add Unplanned Inspection Operations (A): Operations are predefined in the plan; the app doesn't support adding new operations.
* Add Inspection Method to an Inspection Characteristic (E): Methods are assigned in planning, not dynamically in the app.
Thus, "Add unplanned inspection characteristics," "Add remarks to an inspection characteristic," and "Assign documents and links to an inspection characteristic" are the correct answers.References: SAP Help Portal -
"Record Inspection Results Fiori App"; SAP S/4HANA QM User Guide - "Fiori Apps".
NEW QUESTION # 19
During quality inspection, which of the following QM business processes can require a user's digital signature? Note: There are 3 correct answers to this question.
- A. Recording the usage decision for an inspection lot
- B. Assignment of inspection specification
- C. Manual confirmation of a physical sample drawing
- D. Defect recording in inspection lot
- E. Valuation of an inspection result
Answer: A,C,E
Explanation:
Digital signatures in SAP S/4HANA QM (configured via SPRO > Cross-Application Components > Digital Signature) ensure auditability and compliance in critical processes:
* Recording the Usage Decision for an Inspection Lot (B): The usage decision (transaction QA11) can require a digital signature to confirm stock disposition, a common regulatory requirement (e.g., in pharmaceuticals).
* Valuation of an Inspection Result (C): Valuating results (e.g., accept/reject in QE51N) can mandate a signature, especially for critical characteristics, as set in the MIC or inspection type settings.
* Manual Confirmation of a Physical Sample Drawing (D): Confirming sample drawing (transaction QPR2) can require a signature to validate the physical process, configurable in sample management.
* Assignment of Inspection Specification (A): Assigning specs (e.g., in QP01) is a planning step, not typically requiring a signature.
* Defect Recording in Inspection Lot (E): Defect entry (e.g., QF01) may trigger notifications but doesn' t standardly require a signature unless custom-configured.
Thus, "B, C, D" are the correct answers.References: SAP Help Portal - "Digital Signatures in QM"; SAP S
/4HANA QM Customizing Guide - "Signature Strategy".
NEW QUESTION # 20
For which structure elements of a quality notification can you assign a status profile? Note : 2 correct answer
- A. Tasks
- B. Activities
- C. Header
- D. Items
- E. Follow up actions
Answer: A,C
NEW QUESTION # 21
What is the difference audit between audit question and corrective preventive action? Correct 2
- A. Corrective actions have no search field
- B. Audit questions have no status
- C. Audit question have no long texts
- D. Corrective actions have partners
Answer: B,D
NEW QUESTION # 22
Your customer wants to add the quality score of a material as criterion for the vendor evaluation Where do you set the calculation procedure for the quality score:?
- A. Quality info record in procurement
- B. Vendor master
- C. Material master
- D. Dud code
Answer: D
NEW QUESTION # 23
You have assigned a dynamic modification level to an inspection plan, which dynamic modification criterion is pre-defined and not editable?
- A. Customer
- B. Vendor
- C. Manufacturer
- D. Material
Answer: A
NEW QUESTION # 24
Which object type is not stored directly in the data set of a supplier claim notification?
- A. Purchasing document
- B. Quotation
- C. Purchasing organization
- D. Material document
Answer: B
NEW QUESTION # 25
By integrating the QM component in the production process, you can monitor and document process capability and the quality of products.
Which statistical and graphical tools does SAP provide to monitor a process ?
- A. Quality management information system
- B. Statistical process controls (SPC)
- C. Quality management inspection data interface QM-ID
- D. Statistical report charts
Answer: B
NEW QUESTION # 26
You have configured the system so that inspection lots are created for delivery items automatically. What does the system do if no results for the inspection lot have been recorded, and you change the material quantity in the delivery item?
- A. Cancel the current inspection lot and create a new one
- B. Create a new inspection lot with the different quantity
- C. Change the actual lot quantity of the current inspection lot
- D. Block the current inspection lot from processing
Answer: C
Explanation:
For an existing inspection lot tied to a delivery item (e.g., inspection type 10) with no results recorded:
* Change the Actual Lot Quantity of the Current Inspection Lot (A): If the delivery item quantity changes (VL02N), the system updates the inspection lot's quantity to match (status CRTD or INSP), as long as no results are recorded. This maintains synchronization without creating a new lot (SPRO > QM
> Quality Inspection > Inspection Lot Creation > Define Inspection Lot Update).
* Cancel and Create a New One (B): Cancellation and recreation occur only if the item is deleted, not just quantity-changed.
* Create a New Inspection Lot (C): A new lot isn't created for a quantity change; the existing lot adjusts.
* Block the Current Inspection Lot (D): Blocking isn't triggered by quantity changes in this scenario.
Thus, "Change the actual lot quantity of the current inspection lot" is the correct answer.References: SAP Help Portal - "Inspection Lot Updates"; SAP S/4HANA QM User Guide - "Delivery Integration".
NEW QUESTION # 27
Which dynamic modification levels can be set in the inspection plan? Note: There are 3 correct answers to this question.
- A. Inspection lot level
- B. Work center
- C. Operation level
- D. Characteristic level
- E. Inspection type level
Answer: A,C,D
Explanation:
Dynamic modification levels in SAP QM determine the granularity at which inspection scope changes (e.g., reduced to full inspection) are applied in an inspection plan (transaction QP01):
* Characteristic Level (A): Modification can occur at the individual characteristic level within an operation, allowing specific MICs to skip or intensify based on their quality history.
* Inspection Lot Level (C): The entire inspection lot can be modified (e.g., skipped), based on the quality level for the material or combination (e.g., material/supplier).
* Operation Level (D): Modification can apply to an operation, adjusting all characteristics within it based on performance (e.g., operation-specific skip).
* Inspection Type Level (B): Inspection types define the process (e.g., 01 for GR), but dynamic modification is not set at this level; it's tied to plans or lots.
* Work Center (E): Work centers are execution locations, not a level for dynamic modification in QM.
Thus, "Characteristic level," "Inspection lot level," and "Operation level" are the correct answers.References:
SAP Help Portal - "Dynamic Modification in Inspection Planning"; SAP S/4HANA QM Customizing Guide -
"Dynamic Modification".
NEW QUESTION # 28
What type of task lists can the calibration planner assign to a maintenance plan to perform a calibration inspection? Note : 2 correct answer
- A. General task list
- B. Equipment task list
- C. Functional location task list
- D. Inspection plan
- E. Standard routing
Answer: A,B
NEW QUESTION # 29
During results recording, you can create additional inspection characteristics for the inspection operation. Which characteristics can be used as additional inspection characteristics? Note: There are 2 correct answers to this question.
- A. Class characteristics from the classification system
- B. Master inspection characteristics as incomplete copy model
- C. Master inspection characteristics as complete copy model!
- D. Master inspection characteristics as reference characteristic
Answer: A,D
NEW QUESTION # 30
The valuation mode defines the rules for accepting/rejecting inspection characteristics during the inspection results recording. Which valuation mode can be used for a qualitative inspection characteristic? Note: There are 2 correct answers to this question.
- A. Variable inspection s-method
- B. Attributive inspection nonconforming units
- C. Mean value within tolerance range
- D. Manual valuation
Answer: B,D
Explanation:
Valuation modes (set in the sampling procedure, transaction QDV1) for qualitative characteristics include:
* Attributive Inspection Nonconforming Units (A): Used for qualitative characteristics (e.g., pass/fail), counting nonconforming units against a sample to determine acceptance (e.g., ANSI/ASQ Z1.4).
* Manual Valuation (C): Allows manual acceptance/rejection of qualitative results (e.g., "Good" or
"Bad"), a flexible option for subjective assessments.
* Variable Inspection s-Method (B): Applies to quantitative characteristics using statistical variance, not qualitative ones.
* Mean Value Within Tolerance Range (D): Specific to quantitative data, not applicable to qualitative characteristics.
Thus, "Attributive inspection nonconforming units" and "Manual valuation" are the correct answers.
References: SAP Help Portal - "Valuation Modes for Qualitative Characteristics"; SAP S/4HANA QM User Guide - "Sampling Procedures".
NEW QUESTION # 31
What causes the system to issue a message to prevent you from closing a notification?
- A. Open activities
- B. Missing catalog profile
- C. Open tasks
- D. Missing complaint quantity
Answer: C
NEW QUESTION # 32
Which characteristic categories are allowed in the certificate profile? Note: There are 2 correct answers to this question.
- A. Inspection characteristic
- B. Class characteristic
- C. Master inspection characteristic
- D. Process instruction characteristic
Answer: B,C
Explanation:
Certificate profiles in SAP QM (transaction QC01) define the data included in outgoing quality certificates.
The characteristic categories allowed are:
* Master Inspection Characteristic (A): MICs (transaction QS21) are used in inspection plans and material specs, and their results can be included in certificate profiles to report quality data (e.g., measured values).
* Class Characteristic (B): Class characteristics (from the Classification System, transaction CT04) are linked to batches or materials and can be included in certificate profiles to display classification data (e.
g., batch properties).
* Inspection Characteristic (C): This term refers to characteristics in an inspection lot/plan but is not a distinct category; it's covered by MICs, so it's not separately selectable.
* Process Instruction Characteristic (D): Used in Process Industries (PI) for production, not applicable to QM certificate profiles in standard SAP.
Thus, "Master inspection characteristic" and "Class characteristic" are the correct answers.References: SAP Help Portal - "Quality Certificates - Certificate Profiles"; SAP S/4HANA QM User Guide - "Outgoing Certificates".
NEW QUESTION # 33
For which catalog types is it mandatory to valuate the codes in the selected set? Note: There are 2 correct answers to this question.
- A. Characteristic attributes
- B. Defect types
- C. Activities (QM)
- D. Usage decisions
Answer: B,D
Explanation:
In SAP S/4HANA Quality Management, catalogs are used to manage predefined codes for qualitative data recording, and selected sets are subsets of code groups used in specific contexts (e.g., inspection plans).
Valuation of codes (assigning values like "Accepted" or "Rejected") is mandatory for certain catalog types to ensure consistent processing:
* Usage Decisions (A): Catalog type "3" (Usage Decisions) requires valuation in the selected set because the usage decision (UD) determines the stock posting and quality score. In Customizing (SPRO > Quality Management > Quality Inspection > Usage Decision > Define Selected Sets), codes like "A" (Accepted) or "R" (Rejected) must be valuated to trigger specific system actions (e.g., goods movement). This is mandatory for inspection lot completion.
* Defect Types (C): Catalog type "9" (Defects) requires valuation in the selected set when used in defect recording (e.g., transaction QS51). Defect codes (e.g., "Scratch," "Dent") need valuation to classify severity or trigger follow-up actions like notifications, making it mandatory in quality processes.
* Characteristic Attributes (B): Catalog type "1" (Characteristic Attributes) is used for qualitative MICs. Valuation is optional and depends on the characteristic's settings (e.g., "Good/Bad"), not mandatory in the selected set itself.
* Activities (QM) (D): Catalog type "5" (Activities) is used for tasks or follow-ups in notifications.
Valuation is not mandatory in the selected set, as activities are typically descriptive rather than evaluative.
Thus, "Usage decisions" and "Defect types" are the correct answers, as valuation is a required step in their respective processes.References: SAP Help Portal - "Catalogs and Selected Sets in QM"; SAP S/4HANA QM Customizing Guide - "Catalog Management".
NEW QUESTION # 34
Where do you define the procedure for calculation of the quality score at usage decision?
- A. Procurement data in the quality management view of the material master
- B. Inspection type settings in the material master
- C. Usage decision code
- D. Quality info record: Procurement
Answer: C
Explanation:
The quality score in SAP S/4HANA Quality Management reflects the quality performance of an inspection lot, calculated at the usage decision (UD) stage. This score can influence subsequent processes, such as supplier evaluation. The procedure for its calculation is defined as follows:
* Usage Decision Code (A): The quality score calculation procedure is assigned to the usage decision codes in Customizing (SPRO > Quality Management > Quality Inspection > Usage Decision > Define Quality Score Procedure). Each UD code (e.g., "Accepted," "Rejected") can have a specific score or formula linked to it, determining how the system computes the score based on inspection results. This is the correct and standard location for this setting.
* Procurement Data in the Quality Management View of the Material Master (B): This area (transaction MM02, QM view) contains settings like inspection type or control keys but does not define the quality score calculation procedure.
* Quality Info Record: Procurement (C): The quality info record (transaction QI01/QI02) manages supplier-specific QM settings (e.g., release status), but it does not configure the quality score calculation procedure.
* Inspection Type Settings in the Material Master (D): Inspection type settings (e.g., 01 for goods receipt) in the material master activate QM processes but do not define the score calculation logic.
Thus, "Usage decision code" is the correct answer, as it directly ties the score calculation to the UD process.
References: SAP Help Portal - "Quality Score and Usage Decision"; SAP S/4HANA QM Customizing Guide
- "Usage Decision".
NEW QUESTION # 35
Which of the following sample categories can be maintained in the sample-drawing item? Note: There are 3 correct answers to this question.
- A. Primary sample
- B. Initial sample
- C. Pooled sample
- D. Reserve sample
- E. Sample for storage condition
Answer: A,C,D
Explanation:
Sample-drawing items in the sample-drawing procedure (transaction QPV2) define sample categories:
* Reserve Sample (A): A standard category for samples retained for future testing (e.g., stability), maintained in the procedure.
* Pooled Sample (B): Represents combined samples for collective testing, a defined category in sample management.
* Primary Sample (D): The initial sample taken for immediate inspection, a core category in the procedure.
* Initial Sample (C): Not a distinct category; overlaps with "Primary sample."
* Sample for Storage Condition (E): Not a standard category; storage conditions are attributes, not sample types.
Thus, "Reserve sample," "Pooled sample," and "Primary sample" are the correct answers.References: SAP Help Portal - "Sample Management in QM"; SAP S/4HANA QM User Guide - "Sample-Drawing Procedure".
NEW QUESTION # 36
You can user business application programing interface (BAPIs) for different tests Which of the following statements describes a BAPI?
- A. A reporting transaction
- B. Complex function module
- C. An enhancement point
- D. A customer exit
Answer: B
NEW QUESTION # 37
When an inspection plan includes multiple group counter, what determines the unit of measure ?
- A. lot size
- B. Usage
- C. Sampling procedure
- D. Material master
Answer: B
NEW QUESTION # 38
......
Verified C-TS414-2023 dumps Q&As - 2025 Latest C-TS414-2023 Download: https://www.actualpdf.com/C-TS414-2023_exam-dumps.html
Dumps Questions [2025] Pass for C-TS414-2023 Exam: https://drive.google.com/open?id=19AiO3Nbbtutge8dlHPlxjgDKk3wIPgPx
