A fully updated 2021 CPIM Exam Dumps exam guide from training expert ActualPDF
Provides complete coverage of every objective on exam and exam preparation CPIM
NEW QUESTION 323
Which of the following is generally a function of the physical distribution system?
- A. bill of material
- B. Production activity control
- C. packaging
- D. Production planning
Answer: C
NEW QUESTION 324
Which four primary plant types are defined, and they are used to specify the flow of materials through a production process?
- A. C-plant, K-plant, B-plant, S-Plant
- B. I-plant, A-plant, V-plant, T-Plant
- C. A-plant, D-plant, B-plant, F-Plant
- D. I-plant, A-plant, B-plant, G-Plant
Answer: B
NEW QUESTION 325
If the range and variety of product are large:
- A. All of these
- B. Little opportunity to use the specialized machinery and fixtures
- C. Machines must be changed over frequently
- D. Production runs will be short
Answer: A
NEW QUESTION 326
The workstations required to make the product, or family of products, are located close together and in the sequence needed to make the product is called:
- A. Process manufacturing
- B. Productive manufacturing
- C. Repetitive manufacturing
- D. Flow manufacturing
Answer: C
NEW QUESTION 327
Which one of the following is NOT an input to master production schedule (MPS)?
- A. Bill of materials
- B. Sales orders
- C. Inventories and existing capacity
- D. Forecasts for individual end items
Answer: A
NEW QUESTION 328
Operations management works in a complex environment affected by many factors. Among the most important are:
- A. Government regulation
- B. Customer expectations and quality
- C. the economy and competition
- D. all of these
Answer: D
NEW QUESTION 329
Sales 100 100 100 100 100 100
Production 200 200 200 100 100 100
Starting Inventory = 100
The production plan shown above is an example of which production strategy?
- A. Chase
- B. Level
- C. Least Squares
- D. Combination
Answer: D
NEW QUESTION 330
Customer requirements may be based on price, quality, delivery and so forth are called:
- A. Order qualifiers
- B. Order prerequisites
- C. None of these
- D. Order basis
Answer: A
NEW QUESTION 331
Production activity control is responsible for executing the:
- A. MRP
- B. Both of these
- C. Production Schedule
- D. Capacity control
Answer: B
NEW QUESTION 332
Intermittent process layout is sometimes called product layout because the system is set up for a limited range of similar products.
- A. False
- B. True
Answer: A
NEW QUESTION 333
Stockout cost money for which of the following reason?
- A. All of the above
- B. Lost customers
- C. Back-order costs
- D. Lost costs
Answer: A
NEW QUESTION 334
A graph of the number of times (frequency) actual demand is of a particular value produces a bell-shaped curve, this distribution is called:
- A. U-shaped distribution
- B. Abnormal distribution
- C. Bell-shaped distribution
- D. Normal distribution
Answer: D
NEW QUESTION 335
Establish the acceptable limits and are usually expressed as the amount of allowable variation about the desired amount is called:
- A. Tolerances
- B. Charity Act
- C. Acceptability
- D. Minority
Answer: A
NEW QUESTION 336
A tool may shift, a gauge may move, a machine may wear, or an operator may make a mistake, there is a specific reason for these causes of variation, which is called:
- A. Flexible variation
- B. Convertible variation
- C. Assignable variation
- D. Transferable variation
Answer: C
NEW QUESTION 337
Which of the following is NOT the possible root cause in generating some ideas about the main causes of the problem?
- A. Machines
- B. Materials
- C. Environment
- D. Processes
Answer: D
NEW QUESTION 338
A term closely related to capacity required is planned work assigned to a facility for a par.
- A. Target capacity
- B. Capacity available
- C. Load
- D. Output
Answer: C
NEW QUESTION 339
A manufacturer has the alternative of making parts in-house or of buying them from an outside supplier. Reason/s to buy out may be:
- A. All of these
- B. Requires less capital investment
- C. Allows the firm to concentrate on its own areas of specialization
- D. Uses specialized expertise of suppliers
Answer: A
NEW QUESTION 340
Price competition is often severe and profits start to decline, in which phase of the life cycle of a product?
- A. Growth phase
- B. Maturity phase
- C. Decline phase
- D. Introduction phase
Answer: B
NEW QUESTION 341
In order to develop possible solutions, which approach to take to help develop a better method?
- A. All of the above
- B. Rearrange the sequence of operations for more effective results
- C. Simplify whenever possible by making the necessary operations less complex
- D. Eliminate all unnecessary work
Answer: A
NEW QUESTION 342
Each level of MPC (Manufacturing planning and control) differs in the following:
Purpose of the plan
Planning Horizon
Level of detail
Planning Cycle
Since each level is:
- A. For different time span
- B. Responsible for satisfying market demand
- C. For different purposes
- D. Both A and C
Answer: D
NEW QUESTION 343
1) What are the priorities-How much of what is to be produced and when?
2) What is available capacity-What resources do we have?
3) How can differences between priorities and capacity be resolved?
These questions must be answered:
- A. During material resource planning
- B. At each level of MCP
- C. During capacity planning
- D. During priority planning
Answer: B
NEW QUESTION 344
MPS is meant to be:
- A. Depends on situation
- B. cyclic
- C. Flexible
- D. Rigid
Answer: C
NEW QUESTION 345
To provide the required level of customer service at the least total system cost, is the objective of:
- A. Management maintenance
- B. Distribution inventory
- C. Process management
- D. Distribution management
Answer: D
NEW QUESTION 346
Inventory records data are maintained in:
- A. All of the above
- B. Inventory record file
- C. Part master file
- D. Item master file
Answer: A
NEW QUESTION 347
......
Tested Material Used To CPIM: https://www.actualpdf.com/CPIM_exam-dumps.html
Steps Necessary To Pass The CPIM Exam: https://drive.google.com/open?id=1FLDlUU73w_Ws4AG4_XvAR2_vEQmiI4eu
