2021 Latest Cisco 300-410 Real Exam Dumps PDF
300-410 Exam Dumps, 300-410 Practice Test Questions
Having this certification opens new job opportunities as well as senior promotions in current positions you're working at. The following are only a few of the options that will be available for you as a Cisco CCNP Enterprise holder:
- Network architect
- Senior network engineer
- Information technology (IT) director
- Information technology (IT) manager
- Network administrator
- Network security engineer
Passing 300-410 exam also contributes to thickening your wallet! Mote, that according to PayScale, the approximate average annual salary for a CCNP Enterprise certified professional in the industry is a whopping $96k. Getting into details, senior network engineers earn an average of $101k per annum, while the average annual pay of network architects is even higher and reaches the mark of $122k as stated on the same source. If these figures cannot convince you of just how worth being CCNP Enterprise certified is, nothing else could.
NEW QUESTION 15
Refer to the exhibit. Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet.
Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
- A. Issue the eigrp stub command on R1.
- B. Issue the eigrp stub command on R2.
- C. Issue the no eigrp stub command on R2.
- D. Issue the no eigrp stub command on R1.
Answer: D
Explanation:
Section: Layer 3 Technologies
NEW QUESTION 16
Refer to the exhibit.
Which statement about R1 is true?
- A. RIP routes are redistributed to OSPF without any changes.
- B. R1 adds one to the metric for RIP learned routes before redistributing to OSPF.
- C. OSPF redistributes RIP routes only if they have a tag of one.
- D. RIP learned routes are distributed to OSPF with a tag value of one.
Answer: D
NEW QUESTION 17
What are two purposes of using IPv4 and VPNv4 address-family configurations in a Layer 3 MPLS VPN? (Choose two.)
- A. MP-BGP is used to allow overlapping IPv4 addresses between customers to advertise through the network.
- B. The VPNv4 address is used to advertise the MPLS VPN label.
- C. The VPNv4 address consists of a 64-bit route distinguisher that is prepended to the IPv4 prefix.
- D. The IPv4 address is needed to tag the MPLS label.
- E. RD is prepended to the IPv4 route to make it unique.
Answer: A,C
NEW QUESTION 18
What does the PE router convert the Ipv4 prefix to within an MPLS VPN?
- A. It must use Resource Reservation Protocol.
- B. It requires MPLS Traffic Engineering.
- C. It is defined in RFC 3038 and 3039.
- D. It advertises labels per Forwarding Equivalence Class.
Answer: B
NEW QUESTION 19
Refer to the exhibits.
Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands are missing? (Choose two.)
- A. The ip nhrp shortcut commands is missing on the hub router.
- B. The ip nhrp redirect commands is missing on the hub router.
- C. The ip nhrp shortcut command is missing on the spoke routers.
- D. The ip nhrp map command is missing on the hub router.
- E. The ip nhrp redirect command is missing on the spoke routers.
Answer: B,C
NEW QUESTION 20
Refer to the exhibit.
Which statement about R1 is true?
- A. RIP routes are redistributed to OSPF without any changes.
- B. R1 adds one to the metric for RIP learned routes before redistributing to OSPF.
- C. OSPF redistributes RIP routes only if they have a tag of one.
- D. RIP learned routes are distributed to OSPF with a tag value of one.
Answer: D
NEW QUESTION 21
Refer to Exhibit.
A network administrator has successfully configured DMVPN topology between a hub and two spoke routers. Which two configuration commands should establish direct communications between spoke 1 and spoke 2 without going through the hub? (Choose two).
- A. At the hub router, configure ip nhrp redirect the command
- B. At the spoke routers, configure the ip nhrp shortcut command.
- C. At the hub router, configure tne Ip nhrp spoke-tunnel command
- D. At the hub router, configure the ip nhrp shortcut command.
- E. At the spoke routers, configure the ip nhrp spoke-tunnel command.
Answer: A,B
NEW QUESTION 22
Refer to the exhibit.
A company with autonomous system number AS65401 has obtained IP address block 209.165.200.224/27 fro, ARIN. The company needed more IP addresses and was assigned block 209.165.202.128/27 from ISP2. An engineer is ISP1 reports they are receiving ISP2 routes from AS65401. Which configuration onR1 resolves the issue?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/23675-27.html
NEW QUESTION 23
Which command displays the IP routing table information that is associated with VRF-Lite?
- A. show ip route vrf
- B. show ip protocols vrf
- C. show ip vrf
- D. show run vrf
Answer: A
NEW QUESTION 24
Drag and Drop Question
Drag and drop the OSPF adjacency states from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 25
Refer to the exhibit.
A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.1.1?
- A. The route map is applied in the wrong direction.
- B. The weight value in another neighbor statement is higher than 200.
- C. The local preference value in another neighbor statement is higher than 250.
- D. The local preference value should be set to the same value as the weight in the route map.
Answer: A
NEW QUESTION 26
Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?
- A. Router(config-router)#ospfv3 1 ipv4 area 0
- B. router ospfv3 1
address-family ipv4 - C. router ospfv3 1
address-family ipv4 unicast - D. Router(config-if)#ospfv3 1 ipv4 area 0
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-3s/iro-xe-3s-book/ip6-route-ospfv3-add-fam-xe.html
NEW QUESTION 27 
Refer to the exhibit. Why is the remote NetFlow server failing to receive the NetFlow data?
- A. The destination of the flow exporter is not reachable.
- B. The flow monitor is applied to the wrong interface.
- C. The flow exporter is configured but is not used.
- D. The flow monitor is applied in the wrong direction.
Answer: A
Explanation:
Section: Infrastructure Services
NEW QUESTION 28
Drag and drop the packet types from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
Unlike legacy network technologies such as ISDN, Frame Relay, and ATM that defined separate data and control channels, IP carries all packets within a single pipe. Thus, IP network devices such as routers and switches must be able to distinguish between data plane, control plane, and management plane packets to treat each packet appropriately.From an IP traffic plane perspective, packets may be divided into four distinct, logical groups:1. Data plane packets - End-station, user-generated packets that are always forwarded by network devices to other end-station devices. From the perspective of the network device, data plane packets always have a transit destination IP address and can be handled by normal, destination IP address-based forwarding processes.2. Control plane packets - Network device generated or received packets that are used for the creation and operation of the network itself. From the perspective of the network device, control plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as ARP, BGP, OSPF, and other protocols that glue the network together.3. Management plane packets - Network device generated or received packets, or management station generated or received packets that are used to manage the network. From the perspective of the network device, management plane packets always have a receive destination IP address and are handled by the CPU in the network device route processor. Examples include protocols such as Telnet, Secure Shell (SSH), TFTP, SNMP, FTP, NTP, and other protocols used to manage the device and/or network.4. Services plane packets - A special case of data plane packets, services plane packets are also user-generated packets that are also forwarded by network devices to other end-station devices, but that require high-touch handling by the network device (above and beyond normal, destination IP address-based forwarding) to forward the packet. Examples of high-touch handling include such functions as GRE encapsulation, QoS, MPLS VPNs, and SSL/IPsec encryption/decryption, etc. From the perspective of the network device, services plane packets may have a transit destination IP address, or may have a receive destination IP address (for example, in the case of a VPN tunnel endpoint).
NEW QUESTION 29
Refer to the exhibit.
A user cannot SSH to the router. What action must be taken to resolve this issue?
- A. Configure transport input ssh
- B. Configure ip ssh source-interface loopback0
- C. Configure ip ssh version 2
- D. Configure transport output ssh
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configurati x_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_01001.html
NEW QUESTION 30
Refer to the exhibit.
An engineer is trying to configure local authentication on the console line, but the device is trying to authenticate using TACACS+.
Which action produces the desired configuration?
- A. Add the aaa authentication login default none command to the global configuration
- B. Replace the capital "C" with a lowercase "c" m the aaa authentication login Console local command
- C. Add the login authentication Console command to the line configuration
- D. Add the aaa authentication login default group tacacs+ local-case command to the global configuration
Answer: C
NEW QUESTION 31
Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right.
Answer:
Explanation:
NEW QUESTION 32
Refer to The exhibit.
The network administrator must mutually redistribute routes at the Chicago router to the LA and NewYork routers. The configuration of the Chicago router is this:
After the configuration, the LA router receives all the NewYork routes, but NewYork router does not receive any LA routes. Which set of configurations fixes the problem on the Chicago router?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
Explanation:
"LA router receives all the NewYork routes but it does not receive any LA routes" because when redistrubuting into EIGRP, we must configure the default metric.
NEW QUESTION 33
A network engineer is notified that several employees are experiencing network performance related issues, and bandwidth-intensive applications are identified as the root cause. In order to identify which specific type of traffic is causing this slowness, information such as the source/destination IP and Layer 4 port numbers is required. Which feature should the engineer use to gather the required information?
- A. SNMP
- B. WCCP
- C. Cisco IOS EEM
- D. Syslog
- E. NetFlow
Answer: E
Explanation:
NetFlow Flows Key Fields
A network flow is identified as a unidirectional stream of packets between a given source and destination--both are defined by a network-layer IP address and transport-layer source and des-nation port numbers.
Specifically, a flow is identified as the combination of the following key fields:
Source IP address
Destination IP address
Source Layer 4 port number
Destination Layer 4 port number
Layer 3 protocol type
Type of service (ToS)
Input logical interface
NEW QUESTION 34
Refer to the exhibit.
Which two actions should be taken to access the server? (Choose two.)
- A. Modify the access list to add a second line of permit ip any
- B. Add a sequence 20 in the route map to permit access list 1.
- C. Add a floating static route to reach to 192.168.2.2 with administrative distance higher than OSPF
- D. Modify the access list to deny the route to 192.168.2.2.
- E. Modify distribute list seq 10 to permit the route to 192.168.2.2.
Answer: C,D
NEW QUESTION 35
An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE.
Which action should be taken to resolve this issue?
- A. match the passwords
- B. match the MTUs
- C. match the network types
- D. match the hello timers
Answer: B
Explanation:
NEW QUESTION 36
......
What's Involved in the Certification Path
300-410 is not the only test one has to ace to become the Cisco CCNP Enterprise certified, There is also a core exam, 350-401 ENCOR that validates the candidate's proficiency in basic networking principles. Still, 350-401 is a mandatory step while 300-410 can be replaced with any of the other concentration tests chosen from the five more alternatives available.
Apart from being a prerequisite for the CCNP Enterprise certificate, 300-410 exam also earns an individual the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification.
PDF (New 2021) Actual Cisco 300-410 Exam Questions: https://www.actualpdf.com/300-410_exam-dumps.html
Dumps Moneyack Guarantee - 300-410 Dumps UpTo 90% Off: https://drive.google.com/open?id=1O8DxIkcO7xUxgFbxI8dTGLBcjDbA5_FF
