Use Real 300-815 - 100% Cover Real Exam Questions [Dec-2021]
Dumps Brief Outline Of The 300-815 Exam - ActualPDF
How to Prepare for Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services Exam
Preparation Guide for Cisco 300-815: Implementing Cisco Advanced Call Control and Mobility Services Exam
Introduction
Cisco Systems, Inc. is an American global technology company based in San Jose, California, near the heart of Silicon Valley. Cisco designs the manufacture and sale of hardware, software, telecom equipment and other high-tech networking services and products. CISCO, via its many acquired companies, such as OpenDNS, WebEx, Jabber and Jasper, specialized in unique technology markets such as the Internet of Things, domain security and energy management. Cisco technology creates a world of potential.
With Cisco’s Training and Certification, you may enhance your career with a new learning portfolio that offers both developers and network engineers chances. Cisco’s training and certification programmed provides a straight route to your technological professional objectives. IT technology led to the evolution of Cisco’s training and certification programmers to educate instructors, engineers and software developers for success in the industry’s most significant jobs. Explore the power of the Cisco Learning Network’s dynamic culture to start your certification and lifetime learning objectives. Obtain valuable IT training resources for all Cisco certifications. Access IT certification research tools, CCNA practice tests, IT salary and IT job findings. The purpose of this exam guide is to assist you assess if you can successfully finish Cisco IP network troubleshooting and support 300-815 exam test. This guide provides information on the test target audience, required preparation and documentation, as well as a complete list of examination aims, to help you get a degree. We strongly advised to study the 300-815 dumps and 300-815 practice exams for increased chances of passing the exam.
Cisco 300-815 Exam Certification Details:
| Exam Code | 300-815 CLACCM |
| Duration | 90 minutes |
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Exam Name | Implementing Cisco Advanced Call Control and Mobility Services |
| Number of Questions | 55-65 |
| Sample Questions | Cisco 300-815 Sample Questions |
| Recommended Training | Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) |
| Exam Registration | PEARSON VUE |
| Exam Price | $300 USD |
NEW QUESTION 60
Refer to the exhibit.
In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C.
Which two scenarios are correct? (Choose two.)
- A. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
- B. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.
- C. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
- D. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
- E. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
Answer: A,D
NEW QUESTION 61
You see the voice register pool 1 command in your Cisco Unified Communications Manager Express configuration. Which configuration is occurring in this section?
- A. configuration for a pool of SIP phones (similar to device pool on Cisco Unified Communications Manager)
- B. configuration items common for all SIP phones
- C. configuration for SIP registrar service
- D. configuration for a single SIP phone
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_setting_up_using_sip.html
NEW QUESTION 62
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)
- A. Incoming Port in SIP Trunk Security Profile configuration
- B. Incoming Port in SIP Information section of the SIP Trunk configuration.
- C. Incoming Port in Security Information of the SIP Profile configuration.
- D. Destination Port in SIP Information section of the SIP Trunk configuration
- E. Destination Port in SIP Trunk Security Profile configuration
Answer: A,D
NEW QUESTION 63
Which description of RTP timestamps or sequence numbers is true?
- A. Sequence numbers increase by four for each RTP packet transmitted.
- B. The timestamp is used to place the incoming audio and video packets in the correct timing order (playout delay compensation).
- C. The sequence number is used to detect losses.
- D. Timestamps increase by the time "carrying" by a packet.
Answer: B
Explanation:
Reference:
https://www.cs.columbia.edu/~hgs/rtp/faq.html
NEW QUESTION 64
Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?
- A. By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.
- B. Enable the Detailed Call Analysis option under Enterprise Parameters for Unified CM.
- C. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.
- D. Set up the Digit Analysis Complexity in Service Parameters for Cisco Unified CM to TranslationAndAlternatePatternAnalysis.
Answer: A
NEW QUESTION 65
Which two types of distribution algorithm are within a line group? (Choose two.)
- A. top down
- B. circular
- C. random
- D. bottom up
- E. highest preference
Answer: A,B
NEW QUESTION 66
Refer to the exhibit.
A user dials 84969010 and observes that the call is not routed immediately. The administrator notices that after matching the fixed-length translation pattern, the call hits the \+! pattern and waits for interdigit timeout What should be configured to ensure that the call routes out immediately?
- A. Do Not Wait For Interdigit Timeout On Subsequent Hops on the route pattern
- B. Allow Device Override on the route pattern
- C. Do Not Wait For Interdigit Timeout On Subsequent Hops on the translation pattern
- D. Route Next Hop By Calling Party Number on the translation pattern
Answer: C
NEW QUESTION 67
Refer to the exhibit.
An administrator is troubleshooting a problem in which some outbound calls from an internal network to the Internet telephony service provider are not getting connected, but some others connect successfully. The firewall team found that some call attempts on port 5060 came from an unrecognized IP that has not been defined in the firewall rule. What should the administrator configure in the Cisco Unified Border Element to fix this issue?
- A. bind signaling and media to the loopback interface
- B. ip prefix-list to filter the unwanted IP address
- C. use of port 5061 for SIP secure
- D. access list allowing the firewall IP
Answer: A
NEW QUESTION 68
Configure Call Queuing in Cisco Unified Communications Manager. Where do you set the maximum number of callers in the queue?
- A. in the telephony service configuration
- B. in the queuing configuration
- C. in Cisco Unified CM Enterprise Parameters
- D. in Cisco Unified CM Service Parameters
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/200453-Configure-CUCM-Native-Call-Queuing-Featu.html
NEW QUESTION 69
Which configuration must an administrator perform to display Translation Pattern operations in Cisco Unified Communications Manager SDL traces?
- A. Enable the Detailed Call Analysis option under Enterprise Parameters for Unified CM.
- B. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco Unified CM Serviceability page.
- C. Set up the Digit Analysis Complexity in Service Parameters for Cisco Unified CM to TranslationAndAlternatePatternAnalysis.
- D. By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.
Answer: A
Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/taking-sip-call-trace-on-cisco-unified- cm-using-rtmt/ta-p/3161200
NEW QUESTION 70
An administrator is trying to apply configuration changes on Cisco CME. When the users registered on Cisco CME to dial a local number to a PSTN call, the Cisco CME sends an incorrect number of digits. What translation rule fixes the issue and sends the correct number of digits?
- A. voice translation-rule 1
rule 1 /^4...V /2404\0/ type any subscriber plan any isdn - B. voice translation-rule 1
rule 1 /^4...$/2404\0/ type any national plan any Isdn - C. voice translation-rule 1 rule 1 /^4...S/ /9132404 0/ type any subscriber plan any Isdn
- D. voice translation-rule 1 rule 1 // // type any subscriber plan any isdn
Answer: A
NEW QUESTION 71
Refer to the exhibit.
Users report that when they dial to Cisco Unity Connection from an external network, they cannot enter any digits. Assuming only in-band DTMF is supported, what is a reason for this malfunction?
- A. The negotiated RTP port is outside of the range described by RFC, so inband DTMFs do not work.
- B. No DTMF is negotiated.
- C. The rtpmap:0 value for the negotiated codec is marking DTMF as inactive.
- D. There is SIP Delayed Offer. DTMF is supported only in Early Offer.
Answer: B
NEW QUESTION 72
ABC company has decided to implement hunt groups to help distribute calls between members. In order to implement this, administrator must configure hunt list, hunt group, and line groups on Cisco UCM. Which distribution algorithms should the administrator implement?
- A. Top Down, Round Robin, Broadcast
- B. Top Down, Circular, Broadcast
- C. Sequantial, Circular, Broadcast
- D. Top Down, Round Robin, Distribute
Answer: B
NEW QUESTION 73
An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?
- A. R2(config-ephone-dn)#park reservation-group 1
- B. R2(config-ephone-dn)#park reservation-group 60
- C. R2(config-ephone-dn)#park-slot timeout 30 limit 2 recall alternate 3002
- D. R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002
Answer: D
NEW QUESTION 74
Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?
- A. System > Device Pool
- B. Call Routing > Route/Hunt > Local Route Group Names
- C. System > Location Info
- D. Call Routing > Emergency Location > Emergency Location (ELIN) Groups
Answer: B
NEW QUESTION 75
What are the elements for Device Mobility configuration?
- A. device pool, Device Mobility group, and region
- B. device pool, Device Mobility group, and Cisco IP phone
- C. physical location, device pool, and Device Mobility group
- D. physical location. Device Mobility group, and region
Answer: C
Explanation:
Reference:
https://www.ciscopress.com/articles/article.asp?p=1249228&seqNum=4
NEW QUESTION 76
Refer to the exhibit.
Outbound calls to the service provider cause intermittent errors due to a codec mismatch. The internal network sends early offer SDP that contains only G.711 A-law. The service provider reports that some destinations support only G.711 A-law while others support only iLBC. The service provider also allows only 20 active calls at a time Which configuration allows successful media negotiation for all calls using outbound dial peers 5002 and 5003?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 77
Users are reporting that several inter-site calls are failing, and the message "not enough bandwidth" is showing on the display. Voice traffic between locations goes through corporate WAN. and Call Admission Control is enabled to limit the number of calls between sites. How is the issue solved without increasing bandwidth utilization on the WAN links?
- A. Reroute all calls through the PSTN and avoid using WAN.
- B. Disable Call Admission Control and let the calls use the amount of bandwidth they require.
- C. Configure AAR to reroute calls that are denied by Call Admission Control through the PSTN.
- D. Configure Call Queuing so that the user waits until there is bandwidth available
Answer: C
NEW QUESTION 78
......
Certification Training for 300-815 Exam Dumps Test Engine: https://www.actualpdf.com/300-815_exam-dumps.html
300-815 Training & Certification Get Latest CCNP Collaboration : https://drive.google.com/open?id=1zQGiVvAg0lerJiiXGtNCIHozkFTuMnLV
