Use Real CCBA - 100% Cover Real Exam Questions [Jul-2021]
Dumps Brief Outline Of The CCBA Exam - ActualPDF
NEW QUESTION 176
You are working with several business analysts to determine the solution approach for an identified problem. All of the following techniques are acceptable for identifying the solution approach except for which one?
- A. Decision analysis
- B. Brainstorming
- C. Benchmarking
- D. Risk analysis
Answer: D
Explanation:
Risk analysis is not included as a technique for the solution approach. Risk analysis will be used later as part of the business case.
NEW QUESTION 177
Before requirements can actually be approved to be managed, what must be true about the requirements?
- A. Requirements must support the requirements management plan.
- B. Requirements are governed by the requirements management plan.
- C. Requirements must be approved by the technical review board.
- D. Requirements must support the solution scope.
Answer: D
Explanation:
Explanation
For requirements to be approved, they must support the solution scope. The solution scope defines what's in and out of the range of requirements for business analysis activities.
Answer B is incorrect. A technical review doesn't approve requirements; the solution scope defines what's
approved based on what's in alignment with the scope.
Answer C is incorrect. The requirements management plan doesn't affect the requirements that are or are not
approved.
Answer D is incorrect. While this statement may be somewhat true, it doesn't define how requirements are
approved before their governance.
NEW QUESTION 178
In order to plan business analysis activities, you will need four inputs. Which one of the following inputs is not valid for this task?
- A. Stakeholder list, roles, and responsibilities
- B. Stakeholder tolerance for risk
- C. Business analysis approach
- D. Business analysis performance assessment
Answer: B
NEW QUESTION 179
You have identified a task in your task list that cannot be completed until the inspector for the project signs off on the initial deliverables. The inspector's signoff on the initial deliverables is called what?
- A. Milestone
- B. Constraint
- C. Assumption
- D. Dependency
Answer: D
NEW QUESTION 180
You are the business analyst for your organization. You are coaching Tom about the different approaches to business analysis. Which type of business analysis approach has the most business analysis work at the beginning of the project or during the start of a project phase?
- A. Plan-driven approach
- B. Change-driven approach
- C. Value-driven approach
- D. Requirements-driven approach
Answer: A
Explanation:
Explanation/Reference:
The plan-driven approach has the most business analysis work at the beginning of the project or during the start of a project phase. This approach has a high amount of formality and detail for all areas of the business analysis duties, requirements gathering, and monitoring.
B is incorrect. Change-driven approach uses short iterations of business analysis tasks
throughout the project.
A is incorrect. Requirements-driven approach is not a valid business analysis term.
D is incorrect. Value-driven approach is not a valid business analysis term.
NEW QUESTION 181
When a business analyst prepares for elicitation, he must define the scope of the selected elicitation technique, notify the stakeholders of the elicitation plan and technique to be used, and what other preparation activity?
- A. Define the solution.
- B. Schedule all needed resources.
- C. Perform stakeholder analysis.
- D. Create an elicitation plan.
Answer: B
NEW QUESTION 182
Which one of the following statements is most true about changing requirements in a change-driven approach to business analysis and requirements management?
- A. Change-driven approaches don't use a formal change control process.
- B. Change-driven approaches only use a change control system for approved changes.
- C. Change-driven approaches must use a change control system with a change control board.
- D. Change-driven approaches are driven by change control processes.
Answer: A
Explanation:
Explanation
Change-driven approaches typically do not use a formal change control process, as requirements are prioritized and selected for implementation at the beginning of each iteration and no changes to the requirements occur during the iteration process.
Answer A is incorrect. Change-driven approaches don't typically use a change control board.
Answer B is incorrect. This isn't a valid statement to describe the processes of change within a change-driven
approach to requirements management.
Answer D is incorrect. This isn't a valid statement to describe the processes of change within a change-driven
approach to requirements management.
NEW QUESTION 183
Which of the following is an output of the Identify Stakeholders process?
- A. Scope baseline
- B. Project charter
- C. Project scope statement
- D. Stakeholder register
Answer: D
Explanation:
Explanation/Reference:
The Identify Stakeholders process identifies all people or organizations that are impacted by the project. It also documents relevant information regarding their interests, involvement, and impact on project success.
Stakeholder register and stakeholder management strategy are outputs of this process.
B is incorrect. Project charter is one of the inputs of the Identify Stakeholders process.
A is incorrect. Scope baseline is one of the outputs of the Create Work Breakdown Structure
(WBS) process.
D is incorrect. Project scope statement is one of the outputs of the Define Scope process.
NEW QUESTION 184
Before requirements can actually be approved to be managed, what must be true about the requirements?
- A. Requirements must support the requirements management plan.
- B. Requirements are governed by the requirements management plan.
- C. Requirements must be approved by the technical review board.
- D. Requirements must support the solution scope.
Answer: D
NEW QUESTION 185
You are the business analyst for your organization. On your current project you'll be using the change-driven approach for defining requirements and gathering feedback. Which of the following statements best describes the change-driven approach?
- A. The change-driven approach does not define the requirements until after a solution for the problem has been identified.
- B. The change-driven approach favors defining requirements through team interaction.
- C. The change-driven approach favors defining requirements standardized templates.
- D. The change-driven approach favors defining requirements through experimentation.
Answer: B
NEW QUESTION 186
You are the business analyst for the NHQ Project. You have identified several stakeholders that need different types of information related to the requirements. Which stakeholder would need detailed technical interface requirements?
- A. Project manager
- B. Regulators
- C. Implementation subject matter experts
- D. Testers
Answer: C
Explanation:
Explanation/Reference:
The implementation subject matter experts will need requirements that provide detailed interface requirements, so that they may construct the solution. They are responsible for designing and implementing potential solutions. Implementation subject matter experts will provide specialist expertise on the design and construction of the solution components.
A is incorrect. The project manager will need requirements in an easy to understand format, so
that he may create the project scope.
D is incorrect. Regulators may have specific legal, contractual, or governance requirements
regarding what is included in a requirements document.
B is incorrect. Testers focus on understanding the critical success factors based on the needs of
the business users.
NEW QUESTION 187
There are four methods to generate a business need in an organization. Which approach would an organization use when there's recognized competition in the marketplace?
- A. From the top down
- B. From the bottom up
- C. From middle management
- D. From external drivers
Answer: D
NEW QUESTION 188
A business analyst (BA) is measuring solution performance of a new system. What should the BA consider to avoid skewed results and an inaccurate conclusion?
- A. Timing
- B. Frequency
- C. Volume
- D. Currency
Answer: A
Explanation:
When analyzing performance data, business analysts consider the time period when the data was collected to guard against anomalies and skewed trends. A large enough sample size over a sufficient time period will provide an accurate depiction of solution performance on which to make decisions and guard against false signals brought about by incomplete data. Any pronounced and repeated trends, such as a noticeable increase in errors at certain times or a change in process speed when volume is increased, are noted.
NEW QUESTION 189
An organization has two different solutions to grow its business. One project is worth $375,000 to the organization. The second project is worth $565,000 to the business. The organization can only do one of the projects and elects to do the second project for $565,000. What is the opportunity cost of this decision?
- A. $375,000
- B. $190,000
- C. $565,000
- D. $940,000
Answer: A
Explanation:
Explanation
The opportunity cost is the whole amount of the opportunity that can be seized. In this instance, the opportunity cost is $375,000, as this is the project that the organization can't do.
Answer B is incorrect. This answer is the value of the project the organization has elected to do.
Answer A is incorrect. $190,000 is the difference between the two projects and does not reflect the
opportunity cost.
Answer D is incorrect. This is the value of both projects combined and does not represent the opportunity
cost.
NEW QUESTION 190
You are the business analyst for your organization and you're working with your team to define the business problem. As part of this analysis, you've identified the adverse impacts of the problem, the benefits from a potential solution, and how quickly the problem could be solved. What other element should you consider?
- A. Competition and their approach
- B. Dataflow of the problem
- C. Vendors input and paid solutions
- D. Underlying source of the problem
Answer: D
Explanation:
Explanation/Reference:
When examining a business problem, it's always important to define the underlying source of the problem.
This identification can help resolve the matter faster and for less cost. This resolution can also help to prevent the problem from continuing with a new solution that doesn't properly address the problem.
B is incorrect. Competition and their approach may be useful in some instances, but it's not the
best answer considering the question.
A is incorrect. This isn't a valid answer for the question.
C is incorrect. There's no evidence that a dataflow has been created, or even needs to be
created.
NEW QUESTION 191
A business analyst wants to elicit requirements from a large group of stakeholders. One of her primary goals of this event is to produce a broad set of options for solutions. Which elicitation technique would you recommend for this business analyst?
- A. Business rules analysis
- B. Data flow diagrams
- C. Benchmarking
- D. Brainstorming
Answer: D
NEW QUESTION 192
......
Certification Training for CCBA Exam Dumps Test Engine: https://www.actualpdf.com/CCBA_exam-dumps.html
CCBA Training & Certification Get Latest IIBA Certification : https://drive.google.com/open?id=16iBifUo4s4g4TCGkZmtFxR8-2HAQrQqV
