PDF Version DemoFacing the 3V0-41.22 exam without confidence usually means facing it without rehearsal. The 16 VMware Advanced Deploy VMware NSX-T Data Center 3.X practice questions at ActualPDF replace uncertainty with repetition, and in 2026 that remains the reliable formula.
VMware 3V0-41.22 Exam Overview:
| Certification Vendor: | VMware (Broadcom) |
|---|---|
| Exam Name: | VMware Advanced Deploy VMware NSX-T Data Center 3.X |
| Exam Number: | 3V0-41.22 |
| Exam Format: | Performance-based lab exam, Hands-on configuration and troubleshooting tasks |
| Exam Duration: | 135 minutes |
| Related Certifications: | VMware Certified Professional - Network Virtualization (VCP-NV) |
| Available Languages: | English |
| Recommended Training: | VMware NSX-T Data Center Training |
| Exam Registration: | VMware Certification Registration |
| Sample Questions: |  |
| Exam Way: | Online or authorized testing center (performance-based lab environment) |
| Pre Condition: | Recommended prerequisite: VMware Certified Professional - Network Virtualization (VCP-NV) or equivalent NSX-T experience |
| Official Syllabus URL: | https://www.vmware.com/education-services/certification.html |
VMware 3V0-41.22 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| NSX Edge Services | - North-South connectivity setup - Edge node deployment and configuration |
| Troubleshooting and Operations | - Common configuration issue resolution - Monitoring NSX-T components - Packet capture and diagnostics |
| NSX-T Logical Switching | - Segments and logical switches configuration - VLAN and overlay networking integration |
| NSX-T Logical Routing | - Tier-0 and Tier-1 gateway configuration - Routing protocols and route redistribution |
| NSX-T Security | - Micro-segmentation policies - Distributed firewall configuration - Identity and security groups |
| Install, Configure, and Upgrade NSX-T Data Center | - Upgrade procedures and lifecycle management - NSX-T architecture and components deployment - Cluster preparation and transport node configuration |
| Load Balancing | - NSX Advanced Load Balancer concepts - Virtual service configuration |
Questions and Answers About VMware Advanced Deploy VMware NSX-T Data Center 3.X
VMware Advanced Deploy VMware NSX-T Data Center 3.X is an official VMware (Broadcom) exam, listed under exam code 3V0-41.22. A passing result earns you the VMware Certified Advanced Professional - Network Virtualization Deploy (VCAP-NV Deploy) certification at the Professional level. It also ties into VMware Certified Professional - Network Virtualization (VCP-NV), extending its value across your certification roadmap. Employers read this credential as verified competence, which is why it keeps appearing in job requirements.
Recommended prerequisite: VMware Certified Professional - Network Virtualization (VCP-NV) or equivalent NSX-T experience
Requirements evolve, so confirm the current conditions before registering on the official exam page.
Registration for VMware Advanced Deploy VMware NSX-T Data Center 3.X goes through the official channels listed here.
When you schedule, note that the exam is delivered Online or authorized testing center (performance-based lab environment).
VMware (Broadcom) recommends the following training for VMware Advanced Deploy VMware NSX-T Data Center 3.X candidates.
Follow any course with the 16 practice questions in the ActualPDF 3V0-41.22 package; the software engine will even remind you which mistakes need another round.
Yes. ActualPDF provides a free download demo of the VMware Advanced Deploy VMware NSX-T Data Center 3.X material, so you can check the content before choosing a version. After purchase, a one-year warranty covers you: the latest version is sent to you as it releases, free for 365 days, and after expiry you can extend the update service at a 50% discount.
Your purchase is covered by a 100% money-back guarantee with clear conditions. Take the VMware Advanced Deploy VMware NSX-T Data Center 3.X exam within 60 days of purchase; if you fail, provide your unqualified result by submitting a scanned enrollment slip and the official Score Report PDF within 2 days of the exam, and the full refund is processed within 7 days. The exam must match your product, candidate and payer names must match, and attempts within 3 days of purchase, unused downloads, free materials, and expired orders are not covered. Alternatively, exchange for two other exam products of equal value, free, or wait for updates while keeping your original product's update service.
Delivery is instant: files unlock for download at payment and are emailed within one minute. If nothing arrives within 2 hours, check spam and contact customer service, which works 7/24 and normally replies within two hours. Installation is unlimited across your computers.
The VMware Advanced Deploy VMware NSX-T Data Center 3.X syllabus spans 7 domains, led by Troubleshooting and Operations, NSX-T Security, and NSX-T Logical Switching. The complete topic list is published above; candidates who study the map first rarely get lost later.
VMware Advanced Deploy VMware NSX-T Data Center 3.X Sample Questions:
SIMULATION
Task 15
You have been asked to enable logging so that the global operations team can view inv Realize Log Insight that their Service Level Agreements are being met for all network traffic that is going in and out of the NSX environment. This NSX environment is an Active / Active two Data Center design utilizing N-VDS with BCP. You need to ensure successful logging for the production NSX-T environment.
You need to:
Verify via putty with SSH that the administrator can connect to all NSX-Transport Nodes. You will use the credentials identified in Putty (admin).
Verify that there is no current active logging enabled by reviewing that directory is empty -/var/log/syslog- Enable NSX Manager Cluster logging Select multiple configuration choices that could be appropriate success criteria Enable NSX Edge Node logging Validate logs are generated on each selected appliance by reviewing the "/var/log/syslog" Complete the requested task.
Notes: Passwords are contained in the user _ readme.txt. complete.
These task steps are dependent on one another. This task should take approximately 10 minutes to complete.
Correct Answer:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To enable logging for the production NSX-T environment, you need to follow these steps:
Verify via putty with SSH that the administrator can connect to all NSX-Transport Nodes. You can use the credentials identified in Putty (admin) to log in to each transport node. For example, you can use the following command to connect to the sfo01w01en01 edge transport node: ssh admin@sfo01w01en01. You should see a welcome message and a prompt to enter commands.
Verify that there is no current active logging enabled by reviewing that directory is empty -/var/log/syslog-. You can use the ls command to list the files in the /var/log/syslog directory. For example, you can use the following command to check the sfo01w01en01 edge transport node: ls /var/log/syslog. You should see an empty output if there is no active logging enabled.
Enable NSX Manager Cluster logging. You can use the search_web("NSX Manager Cluster logging configuration") tool to find some information on how to configure remote logging for NSX Manager Cluster. One of the results is NSX-T Syslog Configuration Revisited - vDives, which provides the following steps:
Navigate to System > Fabric > Profiles > Node Profiles then select All NSX Nodes then under Syslog Servers click +ADD Enter the IP or FQDN of the syslog server, the Port and Protocol and the desired Log Level then click ADD Select multiple configuration choices that could be appropriate success criteri a. You can use the search_web("NSX-T logging success criteria") tool to find some information on how to verify and troubleshoot logging for NSX-T. Some of the possible success criteria are:
The syslog server receives log messages from all NSX nodes
The log messages contain relevant information such as timestamp, hostname, facility, severity, message ID, and message content The log messages are formatted and filtered according to the configured settings The log messages are encrypted and authenticated if using secure protocols such as TLS or LI-TLS Enable NSX Edge Node logging. You can use the search_web("NSX Edge Node logging configuration") tool to find some information on how to configure remote logging for NSX Edge Node. One of the results is Configure Remote Logging - VMware Docs, which provides the following steps:
Run the following command to configure a log server and the types of messages to send to the log server. Multiple facilities or message IDs can be specified as a comma delimited list, without spaces.
set logging-server <hostname-or-ip-address [:port]> proto <proto> level <level> [facility <facility>] [messageid <messageid>] [serverca <filename>] [clientca <filename>] [certificate <filename>] [key <filename>] [structured-data <structured-data>] Validate logs are generated on each selected appliance by reviewing the "/var/log/syslog". You can use the cat or tail commands to view the contents of the /var/log/syslog file on each appliance. For example, you can use the following command to view the last 10 lines of the sfo01w01en01 edge transport node: tail -n 10 /var/log/syslog. You should see log messages similar to this:
2023-04-06T12:34:56+00:00 sfo01w01en01 user.info nsx-edge[1234]: 2023-04-06T12:34:56Z nsx-edge[1234]: INFO: [nsx@6876 comp="nsx-edge" subcomp="nsx-edge" level="INFO" security="False"] Message from nsx-edge You have successfully enabled logging for the production NSX-T environment.
SIMULATION
Task 14
An administrator has seen an abundance of alarms regarding high CPU usage on the NSX Managers. The administrator has successfully cleared these alarms numerous times in the past and is aware of the issue. The administrator feels that the number of alarms being produced for these events is overwhelming the log files.
You need to:
* Review CPU Sensitivity and Threshold values.
Complete the requested task.
Notes: Passwords are contained in the user_readme.txt. This task is not dependent on other tasks. This task should take approximately 5 minutes to complete.
Correct Answer:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To review CPU sensitivity and threshold values, you need to follow these steps:
Log in to the NSX Manager UI with admin credentials. The default URL is https://<nsx-manager-ip-address>.
Navigate to System > Settings > System Settings > CPU and Memory Thresholds.
You will see the current values for CPU and memory thresholds for NSX Manager, NSX Controller, and NSX Edge. These values determine the percentage of CPU and memory usage that will trigger an alarm on the NSX Manager UI.
You can modify the default threshold values by clicking Edit and entering new values in the text boxes. For example, you can increase the CPU threshold for NSX Manager from 80% to 90% to reduce the number of alarms for high CPU usage. Click Save to apply the changes.
You can also view the historical data for CPU and memory usage for each component by clicking View Usage History. You can select a time range and a granularity level to see the usage trends and patterns over time
